bitcoin-qt - Bitcoin Cash Node documentation

Dogecoin 1.5.1 Released - Upgrade Now!

We’re happy to announce the release of Dogecoin version 1.5.1!
This release incorporates a range of updates from community contributors, some much needed bug fixes, plus some cool treats brought down-stream from the recent Bitcoin 0.9 release candidate.
Thanks to everyone who helped make this release possible, the entire community appreciates it. We recommend all users update to the latest version and please report any issues you may encounter. As always, backup your wallet.dat file before updating (just to be safe).
Downloads: Windows Installer Windows Archive Mac OS X App
Release highlights: - Switched to Boost 1.55 to fix network connectivity issues on Windows - Removal of reliance on IRC for discovering nodes - Support for URL protocol, eg. dogecoin:addr?amount=xxx&(see Bitcoin’s implementation) - Ability to automatically look up transactions on Dogechain from your client - Working Windows setup script and installer - Opt-in debug logging via -debuglog (to save disk space and stop constant writing) - Fixed Mac Splashscreen’s greedy desktop behavior - Reimplemented testnet, fixing RPC crash due to no genesis block being present - Allow user to load any wallet from data directory specified using -wallet=mywallet.dat - Updated to LevelDB 1.15 to address blockchain database corruption issues - Allow user to send change only to specified address(es) using -change= (one -change parameter per address) - Fixed RPC difficulty look up
Troubleshooting
If anyone experiences issues, delete all 1.4 data (apart from your backed up wallet.dat file) and do a fresh 1.5.1 install.
Enjoy!
submitted by Laika1954 to dogecoin [link] [comments]

PIVX Core v3.0.6 released (November 30th) - Optional Upgrade

Github release info and binaries
Forum Post
Important information about the automint and zPIV backup requirements

How to Upgrade

This release is optional but recommended. The latest mandatory upgrade is v3.0.5.1, but if you have any problems with earlier versions the latest version is recommended.
If you are running an older version, gracefully shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/PIVX-Qt (on Mac) or pivxd/pivx-qt (on Linux).
There are no special steps needed like config file changes but a backup is always a good idea.
A note from presstab in case it gets buried in the comments
Command line install and upgrade guide

Notable Changes

(but you should still read the release notes on Github)

Automated Database Corruption Repair

There have been cases of blockchain database corruption that can occur when PIVX client is not closed gracefully. The most common cases of corruption have been identified and the wallet will now automatically fix most of these corruptions. Certain corruption states are still unable to be fixed, but now provide more detailed error messages to the user as well as prompting the user to reindex their database.

More Accurate Error Messages

Some error messages in the wallet have been too vague and done little to help developers and the support team properly identify issues. Error messages have been refined and are now more specific.

Reduction of Debug Log Spam

Many 3rd party services have reported that their debug logs have been overloaded with messages about unknown transaction types. This log spam has been fixed.

Removal of Heavy Running Transaction Search Code

Many areas of the block validation code use a "slow" transaction search, which searches redundantly for transactions. This "slow" search has been removed upstream in Bitcoin and is now removed in PIVX. This provides a more efficient syncing process and generally better performing wallet.

Sync Fix for Block 908000

Many wallets were having trouble getting past block 908000. This block recalculates certain aspects of the money supply and zPIV transactions, and is known to take longer to sync. Code has been added to allow block 908000 to be validated without the user needing to enter any special commands into the debug console.

Working Testnet

Testnet is now accessible with this release of the wallet. Testnet can be accessed using the -testnet startup flag.

zPIV Spending Fix

zPIV that were minted between block 891730 and 895400 were experiencing an error initializing the accumulator witness data correctly, causing an inability to spend those mints. This has been fixed.

Credits

Thanks to everyone who directly contributed to this release:
As well as everyone that helped translating on Transifex.
submitted by turtleflax to pivx [link] [comments]

A Guide to Keeping Keys Offline Using Armory +rPi

Hi Redditors.
I am going to post in this thread my experiences in getting my Desktop (Debian) machine running Armory in watch-only mode, and coupling that with an offline Raspberry Pi (which holds my private keys) for signing the transactions previously made in watch-only mode.
I actually compiled Armory from source directly on my Pi. This guide is probably more for the bitcoin 'power user', as to run Armory online, and broadcast the signed transactions, you need to have a bitcoin full node running (bitcoind).
Basic requirements:
Aimed-for Setup:
I'll post the guide in digestible sections...

Section 1

I should begin by saying I installed source code from git, and got Armory to build the DB on my desktop initially, WITHOUT creating a wallet.. (This allowed me to debug what was going on a little!)
Go to Bitcoin.org, select Armory..
It leads to a Download from Git:
https://github.com/goatpig/BitcoinArmory/releases
Followed the procedure for Linux Debian verify code, compile, install, all straight-forward..
Began by running bitcoind, and telling Armory where to find it. This is the command I used, obviously it was all on one line and didn't include the arrows/explanations!:
python ArmoryQt.py \ --satoshi-datadir=/BlockChain/chain20180414/blocks \ # <-----(where my bitcoind blocks live) --datadir=/ArmoryDataDi \ # <-----(this is instead of ~/.armory) --dbdir=/ArmoryDataDidatabases # <-------(again, non std. place used for Armory's databases.. my choice.) 
So, on the Desktop, after the initial "build databases"
(NB the initial "Build Databases" took about 1.5h and my two CPUs were maxed the whole time, Temps up to 62C. Not ideal; Im not in a rush!)
I then wanted to import a watch-only wallet.
Before I did this, I took a full backup of the Armory data dir:
/ArmoryDataDi
(or ~/.armory in a default installation).
I'd hate to have to make Armory do another full sync with the bitcoind node!

Section 2

Next step: offline wallet (with Private Keys) is on a Raspberry Pi.
I downloaded the source and managed to compile it on the pi itself! :)
Though there were some gymnastics needed to setup the Pi.
My Pi is running Raspbian based on Wheezy.. quite old!
I did the following on the Pi:
apt-get update apt-get upgrade (<---took about an hour!) apt-get install autotools-dev apt-get install autoconf 
Then I followed the instructions exactly as I had done for my Debian Desktop machine, EXCEPT:
I had to increase the Pi's swap space. I upped it from 100Mb to 400Mb.
The compilation took 7 hours, and my poor SD card got a thrashing.
But after compilation, I put the Swap back to 100Mb and Armory runs ok with about 150Mb of memory (no swap needed).
Swap increase on the Pi:
use your favourite editor, and open the file /etc/dphys-swapfile
add/change the following line:
CONF_SWAPSIZE=400 
Then, REBOOT the Pi:
sudo shutdown -h -P now 
Once the compilation was done on the Pi, put the swap back, rebooted and created an Armory wallet.
I added manual entropy and upped the encryption 'time' from 250ms to 2500ms - since the Pi is slow, but I'll be happy to wait for more iterations in the Key Derivation Function.
Once the wallet was created, it obviously prompts you for backup.
I want to add a private key of my own (i.e. import), so don't do the backup until this is over.
I import my Private Key, and Armory checks that this corresponds to a Public Key, which I check is correct.
This is the point now where the Pi storage medium (e.g an SD card) has to be properly destroyed if you ever get rid of it.
I had thought that now would be a good time to decide if your new wallet will generate Segwit receiving addresses, and also addresses used to receive 'change' after a transaction..
But it seems Armory WON'T let you switch to P2SH-P2WPKH unless your Armory is connected to a node offering "WITNESS" service.
Obviously, my Pi is offline and will never connect to a node, so the following will not work on the Pi:
NB: I thought about setting this on the Debian "watch-only" wallet, but that would surely mean doom, as the Pi would not know about those addresses and backups might not keep them.. who knows...
So, end result:- no segwit for me just yet in my offline funds.

--If anyone can offer a solution to this, I'd be very grateful--

Section 3

Ok, now this is a good point to back up your wallet on the Pi. It has your imported keys. I choose a Digital Backup - and put it on a USB key, which will never touch the internet and will be stored off-site. I also chose to encrypt it, because I'm good with passwords..
NB: The Armory paper backup will NOT back up your imported private keys, so keep those somewhere if you're not sweeping them. It would be prudent to have an Armory paper backup anyway, but remember it will likely NOT help you with that imported key.
Now for the watch-only copy of the wallet. I want to get the "watch-only" version onto my Desktop Debian machine.
On the Pi, I created (exported to a USB key) a "watching-only" copy of my wallet.
I would use the RECOMMENDED approach, export the "Entire Wallet File".
As you will see below, I initially exported only the ROOT data, which will NOT capture the watching-only part of the Private Key I entered manually above (i.e. the public Key!).
Now, back on the Debian Desktop machine...
I stopped all my crontab jobs; just give Armory uninterrupted CPU/memory/disk...
I also stopped bitcoind and made a backup prior to any watch-only wallet being imported.
I already made a backup of Armory on my Desktop, before any wallet import.
(this was needed, as I made a mistake.. see below)
So on the Debian Desktop machine, I begin by firing up bitcoind.
my command for this is:
./bitcoind -daemon -datadir=/BlockChain/chain20180414 -dbcache=400 -maxmempool=400 

Section 4

I try running Armory like this:
(I'm actually starting Armory from a script - StartArm.sh)
Inside the script StartArm.sh, it has the line:
python ArmoryQt.py --ram-usage=4 --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
I know from bitter experience that doing a scan over the blockchain for a new wallet takes a looong time and a lot of CPU, and I'd like it to play nicely; not gobble all the memory and swap and run my 2xCPUs both at 100% for four hours...
So... I aim to run with --ram-usage=X and --thread-count=X
(For me in the end, X=1 but I began with X=4)
I began with --ram-usage=4 (<--- = 4x128Mb)
The result is below...
TypeError: cannot concatenate 'str' and 'int' objects 
It didn't recognise the ram-usage and carried on, crippling my Debian desktop PC.
This is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up, and it can take over 30 minutes just to exit nicely from bitcoind and ArmoryDB.
So, I ssh to the machine from another computer, and keep an eye on it with the command
"free -h" 
I'd also be able to do a "sudo reboot now" if needed from here.

Section 5

So, trying to get my --ram-usage command recognised, I tried this line (added quotes):
python ArmoryQt.py --ram-usage="4" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
But no, same error...
Loading Armory Engine: Armory Version: 0.96.4 Armory Build: None PyBtcWallet Version: 1.35 Detected Operating system: Linux OS Variant : ('debian', '9.4', '') User home-directory : /home/ Satoshi BTC directory : /BlockChain/chain20180414 Armory home dir : /ArmoryDataDi ArmoryDB directory : /ArmoryDataDidatabases Armory settings file : /ArmoryDataDiArmorySettings.txt Armory log file : /ArmoryDataDiarmorylog.txt Do wallet checking : True (ERROR) ArmoryUtils.py:3723 - Unsupported language specified. Defaulting to English (en) (ERROR) ArmoryQt.py:1833 - Failed to start Armory database: cannot concatenate 'str' and 'int' objects Traceback (most recent call last): File "ArmoryQt.py", line 1808, in startArmoryDBIfNecessary TheSDM.spawnDB(str(ARMORY_HOME_DIR), TheBDM.armoryDBDir) File "/BitcoinArmory/SDM.py", line 387, in spawnDB pargs.append('--ram-usage=' + ARMORY_RAM_USAGE) TypeError: cannot concatenate 'str' and 'int' objects 

Section 6

So, I edit the Armory python file SDM.py:
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=4') #COMMENTED THIS, SO I CAN HARDCODE =4 # ' + ARMORY_RAM_USAGE) 
Running it, I now have acknowledgement of the --ram-usage=4:
(WARNING) SDM.py:400 - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=4 
Also, even with ram-usage=4, it used too much memory, so I told it to quit.
It took over 30 minutes to stop semi-nicely. The last thing it reported was:
ERROR - 00:25:21: (StringSockets.cpp:351) FcgiSocket::writeAndRead FcgiError: unexpected fcgi header version 
But that didn't seem to matter or corrupt the Armory Database, so I think it's ok.
So, I get brave and change SDM.py as below, and I make sure my script has a command line for --ram-usage="ABCDE" and --thread-count="FGHIJ"; the logic being that these strings "ABCDE" will pass the IF criteria below, and my hardcoded values will be used...
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=1') #COMMENTED THIS, SO I CAN HARDCODE =1 # ' + ARMORY_RAM_USAGE) if ARMORY_THREAD_COUNT != -1 pargs.append('--thread-count=1') #COMMENTED THIS, SO I CAN HARDCODE =1 #' + ARMORY_THREAD_COUNT) 
So, as usual, I use my script and start this with: ./StartArm.sh
(which uses command line:)
python ArmoryQt.py --ram-usage="ABCDE" --thread-count="FGHIJ" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
(this forces it to use my hard-coded values in SDM.py...)
So, this is the command which it reports that it starts with:
(WARNING) SDM.py:400 - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=1 --thread-count=1 
Again, this is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up. So I ssh to the machine and keep an eye on it with:
"free -h" 

Section 7

So, on the Debian Desktop PC, I inserted the USB stick with the watch-only wallet I exported from the Pi.
Start Armory...
Import "Entire Wallet File" watch-only copy.
Wait 4 hours..
YAY!!!
After running Armory for about 30m, the memory usage dropped by 400m... wierd...
It took ~2 hours to get 40% completion.
After 3.5 hours it's almost there...
The memory went up to about 1.7Gb in use and 900Mb of Swap, but the machine remained fairly responsive throughout, apart from a few (10?) periods at the start, where it appeared to freeze for 10-30s at a time.
(That's where my ssh session came in handy - I could check the machine was still ok with a "free -h" command)
Now, I can:
Create an unsigned transaction on my Desktop,
Save the tx to USB stick,
Move to the Pi,
Sign the tx,
Move back to the Desktop,
Broadcast the signed tx.

Section 8

My initial Mistake:
This caused me to have to roll-back my Armory database, using the backup. so you should try to avoid doing this..
On the Pi, I exported only the ROOT data, which will NOT capture the watching-only part of the Private Key
It is RECOMMENDED to use the Digital Export of Entire Wallet File from the Pi when making a watch-only copy. If you just export just the "ROOT data", not the "Entire Wallet File", you'll have problems if you used an imported Private Key in the offline wallet, like I did.
Using the ROOT data text import, after it finished... my balance was zero. So,. I tried a Help->Rescan Balance (Restart Armory, takes 1minute to get back up and running) No Luck. Still zero balance.
So, I try Rescan Databases.. This will take longer. Nah.. no luck.
So, I tried again, thinking it might be to do with the fact that I imported the text "root data" stuff, instead of following the (Recommended) export of watching-wallet file.
So, I used my Armory backup, and wound back the ArmoryDataDi to the point before the install of the (zero balance) wallet. (you should not need to do this, as you will hopefully use the RECOMMENDED approach of exporting the "Entire Wallet File"!)
submitted by fartinator to Bitcoin [link] [comments]

I'm tired of bitcoin-qt

Mini rant. I was happy using bitcoin-qt for quite a few months now, It had gave me a few headaches, sometimes the database was corrupted or something, just re-index it. It worked fine.
I always exit bitcoin-qt before shutting down the computer, to never let this happen again, but it happens from time to time.
Anyway, five days ago, it started again with the database problem. I tried to reindex it, delete last blocks and reindex it, nothing was working. So, OK, screw it, delete all (except wallet file) and let download the whole blockchain again. ... Well... it stopped syncing after a while. It tells me that I need to update the client. Other times I it tells me it's syncing, but it shows a 0 blocks indexed (and no arrows icon on bottom-right).
After 5 days, I just delete everything (again) and started from 0.
I don't like the idea of thin client, but for the moment I've downloaded MultiBit, I read that Armory works on top of bitcoin-qt, should I try it or I will have the same problems?
I know this is my problem, not a problem with bitcoin-qt itself, it worked very good for months. I don't think it's a network problem (I have a good connection), not a software problem (Debian Squeeze), as I said, I exit the program before the computer. Just a mini-rant about all this.
I'm also concerned this happens to less techie people, they could easily delete the wallet file, or just get tired of bitcoins because of similar problems with the programs.
submitted by still_unregistered to Bitcoin [link] [comments]

HELP! Bitcoin qt client crashed on my computer with a database error! Lost all my bitcoins?!

hey guys,
The bitcoin qt client was catching up with the blockchain (5 days worth), when after maybe 15 minutes, it comes up with an error, "database corrupted" or something along the lines of that. I looked it up and users said to delete everthing in my %appdata/roaming/bitcoin% directy except the wallet.dat file.
So I did that, and downloaded the latest bitcoin qt client, but as it's got 252 weeks to catch up on, it shows 0 btc, is this normal? Will it show my bitcoins whilst it's done updating?
It should show it at the end, right? Once it's seen the transactions on the blockchain? Sorry, I'm just ultra panicky atm from not seeing my bitcoins :S
EDIT: GOT MY BITCOINS. For anyone that has this problem in the future, it's 99.99% likely it's a RAM problem. Took my dodgy ram stick out and used a rescan tag & it was all good to go! You can also import the boostrap.dat file.
submitted by TheNewHero to Bitcoin [link] [comments]

Corrupted wallet.dat with 18 btc - Possible to restore bitcoins?

I have a wallet from yore, had 18 btc that got corrupted and I kind of just lost interest in bitcoins. Well now that 18 is woth $2K or so and I fired up a new bitcoin-qt wallet with that wallet.dat file to see if it would read it. Well it almost did.
The GUI read 18 unverified bitcoins at first, and as the blockchain neared completion, it verified every bitcoin. I was so excited. But then it crashed with a runaway exception "can't open database file wallet.dat -30974"
I get that error when I try to send a bitcoin too. Any chance of restoring this near-working wallet?
EDIT: Bitcoins have been recovered!!!!!!! The final solution was provided by musicbunny, to which I am extremely greatful for his out-of-the box solution. I think pywallet suggested by eof would have done the trick too. The keys probably could have been extracted, but I was running into trouble with my version of Python. Maybe it needed Python 2?
submitted by bitbeast to Bitcoin [link] [comments]

Reminder - bitcoin is beta software! Corrupt wallets, bugs, errors, oh my! I dodged a bullet today, make sure you are prepared for disaster too!

Hello everyone,
This is a public service announcement brought to you by a fellow bitcoiner who dodged a bullet today.
I'm very adamant about backups, having lost data many years ago, I always try to make sure I have backups of backups now. External hard drives, raids, the cloud, leverage anything and everything to insure you won't lose data.
Well today it all came to fruition. If I was not so strong willed about keeping backups, I might have lost all my bitcoins today. Last night I went to sleep with the bitcoin program working perfectly on my computer. I run debian, nothing fancy or crazy or custom, just a stock os with a stock bitcoin install.
I wake up today and bitcoin has quit itself last night. I load bitcoin-qt and I get the, "your database has corrupted, would you like to try to fix" dialogue box. I select yes, it looks like it's working but gets near the end and dies. This looks like the same issue I had weeks ago. I alerted sipa, one of the main developers about it and was informed it was probably an os level instability on my end. This was weeks ago, so I reinstalled my system entirely, did memory checks and checked the hard drive for bad blocks or corruption to rule out hardware issues.
So here we are, on a brand new os install, with a brand new bitcoin install, with a fresh blockchain, and yes it totally corrupted itself in the middle of the night without any user interaction on my part.
So back to the story, I keep a copy of the blockchain before any corruptions occur on an external hard drive so I can easily reload in case this exact situation occurs. So I nuke the old one, load this existing blockchain, and am greeted with this lovely dialogue box I've never seen before, "wallet.dat corrupt, salvage failed". My heart skips a beat. Really? My wallet is also corrupted? Great.
Luckily I keep encrypted incremental backups on one of my external drives, decrypt, load that, and am up and running again.
To all those who live dangerously without backups, you are playing with fire and WILL get burned eventually. If you are not making daily backups to multiple sources, you are doing it wrong. If I wasn't so careful, I'd currently be out hundreds of bitcoins, and possibly posting on the forums on how to fix a corrupt wallet.
If anybody is curious, the link below is the bug I ran into. I'm not sure if this is directly related to the wallet corruption. I'm guessing its at least related to the blockchain corruption though, because this is the exact same error I received last time my blockchain corrupted itself. I alerted one of the main developers to my issue, so at least they are aware of it.
https://github.com/bitcoin/bitcoin/issues/2402
submitted by dodgedABullet_ to Bitcoin [link] [comments]

Bitcoin QT not launching, please help

In hindsight I relized my title is wrong so..
"QT is not able to sync with the blockchain"
Hi,
I've been trying to launch my bitcoin-qt for weeks now, but every time it tries to download the blockchain it ends at a random point saying its database is corrupted. I've deleted and reinstalled everything at least 3 times. including the appdata subfolder. What else can I do? There seems to be some issue with storing or downloading the blockchain, thus the client will not launch. Any constructive advice would be great, thanks
My OS is win7 64bit
submitted by ESTeGo to Bitcoin [link] [comments]

How Do I Move My Wallet To Multibit?

I currently use the Bitcoin-QT wallet. however, sometime in the past hour, some clown decided to put a virus signature in the blockchain. This caused my antivirus to spazz out and corrupt my block database. How can I move my Bitcoin wallet to multibit? I have encrypted backups with a passphrase.
Thanks in advance.
edit: Are there any good lightweight alternatives to multibit? Forgot it had issues.
submitted by skilliard4 to Bitcoin [link] [comments]

Bitcoin Core 0.11.0 released | Wladimir J. van der Laan | Jul 12 2015

Wladimir J. van der Laan on Jul 12 2015:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Bitcoin Core version 0.11.0 is now available from:
<https://bitcoin.org/bin/bitcoin-core-0.11.0/>
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
<https://github.com/bitcoin/bitcoin/issues>
The entire distribution is also available as torrent:
magnet:?xt=urn:btih:82f0d2fa100d6db8a8c1338768dcb9e4e524da13&dn;=bitcoin-core-0.11.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F 
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrade warning
Because release 0.10.0 and later makes use of headers-first synchronization and
parallel block download (see further), the block files and databases are not
backwards-compatible with pre-0.10 versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility. There are no
known problems when downgrading from 0.11.x to 0.10.x.
Important information

Transaction flooding
At the time of this release, the P2P network is being flooded with low-fee
transactions. This causes a ballooning of the mempool size.
If this growth of the mempool causes problematic memory use on your node, it is
possible to change a few configuration options to work around this. The growth
of the mempool can be monitored with the RPC command getmempoolinfo.
One is to increase the minimum transaction relay fee minrelaytxfee, which
defaults to 0.00001. This will cause transactions with fewer BTC/kB fee to be
rejected, and thus fewer transactions entering the mempool.
The other is to restrict the relaying of free transactions with
limitfreerelay. This option sets the number of kB/minute at which
free transactions (with enough priority) will be accepted. It defaults to 15.
Reducing this number reduces the speed at which the mempool can grow due
to free transactions.
For example, add the following to bitcoin.conf:
minrelaytxfee=0.00005 limitfreerelay=5 
More robust solutions are being worked on for a follow-up release.
Notable changes

Block file pruning
This release supports running a fully validating node without maintaining a copy
of the raw block and undo data on disk. To recap, there are four types of data
related to the blockchain in the bitcoin system: the raw blocks as received over
the network (blk???.dat), the undo data (rev???.dat), the block index and the
UTXO set (both LevelDB databases). The databases are built from the raw data.
Block pruning allows Bitcoin Core to delete the raw block and undo data once
it's been validated and used to build the databases. At that point, the raw data
is used only to relay blocks to other nodes, to handle reorganizations, to look
up old transactions (if -txindex is enabled or via the RPC/REST interfaces), or
for rescanning the wallet. The block index continues to hold the metadata about
all blocks in the blockchain.
The user specifies how much space to allot for block & undo files. The minimum
allowed is 550MB. Note that this is in addition to whatever is required for the
block index and UTXO databases. The minimum was chosen so that Bitcoin Core will
be able to maintain at least 288 blocks on disk (two days worth of blocks at 10
minutes per block). In rare instances it is possible that the amount of space
used will exceed the pruning target in order to keep the required last 288
blocks on disk.
Block pruning works during initial sync in the same way as during steady state,
by deleting block files "as you go" whenever disk space is allocated. Thus, if
the user specifies 550MB, once that level is reached the program will begin
deleting the oldest block and undo files, while continuing to download the
blockchain.
For now, block pruning disables block relay. In the future, nodes with block
pruning will at a minimum relay "new" blocks, meaning blocks that extend their
active chain.
Block pruning is currently incompatible with running a wallet due to the fact
that block data is used for rescanning the wallet and importing keys or
addresses (which require a rescan.) However, running the wallet with block
pruning will be supported in the near future, subject to those limitations.
Block pruning is also incompatible with -txindex and will automatically disable
it.
Once you have pruned blocks, going back to unpruned state requires
re-downloading the entire blockchain. To do this, re-start the node with
  • -reindex. Note also that any problem that would cause a user to reindex (e.g.,
disk corruption) will cause a pruned node to redownload the entire blockchain.
Finally, note that when a pruned node reindexes, it will delete any blk???.dat
and rev???.dat files in the data directory prior to restarting the download.
To enable block pruning on the command line:
  • - -prune=N: where N is the number of MB to allot for raw block & undo data.
Modified RPC calls:
    • getblockchaininfo now includes whether we are in pruned mode or not.
    • getblock will check if the block's data has been pruned and if so, return an
error.
  • - getrawtransaction will no longer be able to locate a transaction that has a
UTXO but where its block file has been pruned.
Pruning is disabled by default.
Big endian support
Experimental support for big-endian CPU architectures was added in this
release. All little-endian specific code was replaced with endian-neutral
constructs. This has been tested on at least MIPS and PPC hosts. The build
system will automatically detect the endianness of the target.
Memory usage optimization
There have been many changes in this release to reduce the default memory usage
of a node, among which:
    • Accurate UTXO cache size accounting (#6102); this makes the option -dbcache
    precise where this grossly underestimated memory usage before
    • Reduce size of per-peer data structure (#6064 and others); this increases the
    number of connections that can be supported with the same amount of memory
    • Reduce the number of threads (#5964, #5679); lowers the amount of (esp.
    virtual) memory needed
Fee estimation changes
This release improves the algorithm used for fee estimation. Previously, -1
was returned when there was insufficient data to give an estimate. Now, -1
will also be returned when there is no fee or priority high enough for the
desired confirmation target. In those cases, it can help to ask for an estimate
for a higher target number of blocks. It is not uncommon for there to be no
fee or priority high enough to be reliably (85%) included in the next block and
for this reason, the default for -txconfirmtarget=n has changed from 1 to 2.
Privacy: Disable wallet transaction broadcast
This release adds an option -walletbroadcast=0 to prevent automatic
transaction broadcast and rebroadcast (#5951). This option allows separating
transaction submission from the node functionality.
Making use of this, third-party scripts can be written to take care of
transaction (re)broadcast:
    • Send the transaction as normal, either through RPC or the GUI
    • Retrieve the transaction data through RPC using gettransaction (NOT
    getrawtransaction). The hex field of the result will contain the raw
    hexadecimal representation of the transaction
    • The transaction can then be broadcasted through arbitrary mechanisms
    supported by the script
One such application is selective Tor usage, where the node runs on the normal
internet but transactions are broadcasted over Tor.
For an example script see [bitcoin-submittx](https://github.com/laanwj/bitcoin-submittx).
Privacy: Stream isolation for Tor
This release adds functionality to create a new circuit for every peer
connection, when the software is used with Tor. The new option,
-proxyrandomize, is on by default.
...[message truncated here by reddit bot]...
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-July/009400.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

BitcoinQT keeps failing to download the blockchain in new ways.

I bought a bitcoin early last year and used bitcoinQT just fine. Then a few months ago I rebuilt my computer and added an SSD, so I backed up the wallet and reformated. Since I didn't plan to sell anytime soon I didn't really need to reinstall right away. A few weeks ago I decided to reinstall QT, but I would need to have the chain on the HDD to preserve space. I used the -datadir parameter and got 9gb into the chain before it stopped downloading blocks and showed a banner in the program that said "Warning: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade." This was with version 0.8.5. The holidays came and I got side tracked until now. I got back to it and the problem was still there, but I saw 0.8.6 was out, so I deleted the chain and started over. Now I've gotten 10gb into the block and suddenly while downloading QT crashed with a message "System error:database corrupted." I opened QT again and it went back to work and got another 1 hour into the download before it happened again and now when I try to open the program it errors every time with this message. Though sometimes when I double click the shortcut, rather than crashing with this error it will open but ignore the -datadir, starting to download the chain from the beginning and putting it in my user folder on the SSD. Any ideas? Thanks
The directories Im using are
C:\Program Files (x86)\BitcoinQT for the program and
G:\Programs\Bitcoin\QT-Files for the blockchain
The target Im using in the shortcut is:
"C:\Program Files (x86)\BitcoinQT\bitcoin-qt.exe" -datadir=G:\Programs\Bitcoin\QT-Files\Bitcoin
submitted by Bulldogg658 to BitcoinWallet [link] [comments]

Bitcoin-QT 0.9 disponível para download

The Core Developers of Bitcoin released the 0.9.0 FINAL of Bitcoin Core (aka Bitcoin QT).
DOWNLOAD:
This is a Final Version, but its the same as 0.9.0rc3
Sources: https://github.com/bitcoin/bitcoin/releases http://sourceforge.net/projects/bitcoin/files/Bitcoin/bitcoin-0.9.0/ https://bitcoin.org/bin/0.9.0/README.txt
Bitcoin Core version 0.9.0 is now available from:
https://bitcoin.org/bin/0.9.0/
This is a release candidate for a new major version. A major version brings both new features and bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues

How to Upgrade

If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), uninstall all earlier versions of Bitcoin, then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).
If you are upgrading from version 0.7.2 or earlier, the first time you run 0.9.0 your blockchain files will be re-indexed, which will take anywhere from 30 minutes to several hours, depending on the speed of your machine.
On Windows, do not forget to uninstall all earlier versions of the Bitcoin client first, especially if you are switching to the 64-bit version.

Windows 64-bit installer

New in 0.9.0 is the Windows 64-bit version of the client. There have been frequent reports of users running out of virtual memory on 32-bit systems during the initial sync. Because of this it is recommended to install the 64-bit version if your system supports it.
NOTE: Release candidate 2 Windows binaries are not code-signed; use PGP and the SHA256SUMS.asc file to make sure your binaries are correct. In the final 0.9.0 release, Windows setup.exe binaries will be code-signed.

OSX 10.5 / 32-bit no longer supported

0.9.0 drops support for older Macs. The minimum requirements are now: * A 64-bit-capable CPU (see http://support.apple.com/kb/ht3696); * Mac OS 10.6 or later (see https://support.apple.com/kb/ht1633).

Downgrading warnings

The 'chainstate' for this release is not always compatible with previous releases, so if you run 0.9 and then decide to switch back to a 0.8.x release you might get a blockchain validation error when starting the old release (due to 'pruned outputs' being omitted from the index of unspent transaction outputs).
Running the old release with the -reindex option will rebuild the chainstate data structures and correct the problem.
Also, the first time you run a 0.8.x release on a 0.9 wallet it will rescan the blockchain for missing spent coins, which will take a long time (tens of minutes on a typical machine).

Rebranding to Bitcoin Core

To reduce confusion between Bitcoin-the-network and Bitcoin-the-software we have renamed the reference client to Bitcoin Core.

Autotools build system

For 0.9.0 we switched to an autotools-based build system instead of individual (q)makefiles.
Using the standard "./autogen.sh; ./configure; make" to build Bitcoin-Qt and bitcoind makes it easier for experienced open source developers to contribute to the project.
Be sure to check doc/build-*.md for your platform before building from source.

Bitcoin-cli

Another change in the 0.9 release is moving away from the bitcoind executable functioning both as a server and as a RPC client. The RPC client functionality ("tell the running bitcoin daemon to do THIS") was split into a separate executable, 'bitcoin-cli'. The RPC client code will eventually be removed from bitcoind, but will be kept for backwards compatibility for a release or two.

walletpassphrase RPC

The behavior of the walletpassphrase RPC when the wallet is already unlocked has changed between 0.8 and 0.9.
The 0.8 behavior of walletpassphrase is to fail when the wallet is already unlocked:
> walletpassphrase 1000 walletunlocktime = now + 1000 > walletpassphrase 10 Error: Wallet is already unlocked (old unlock time stays) 
The new behavior of walletpassphrase is to set a new unlock time overriding the old one:
> walletpassphrase 1000 walletunlocktime = now + 1000 > walletpassphrase 10 walletunlocktime = now + 10 (overriding the old unlock time) 

Transaction malleability-related fixes

This release contains a few fixes for transaction ID (TXID) malleability issues:

Transaction Fees

This release drops the default fee required to relay transactions across the network and for miners to consider the transaction in their blocks to 0.01mBTC per kilobyte.
Note that getting a transaction relayed across the network does NOT guarantee that the transaction will be accepted by a miner; by default, miners fill their blocks with 50 kilobytes of high-priority transactions, and then with 700 kilobytes of the highest-fee-per-kilobyte transactions.
The minimum relay/mining fee-per-kilobyte may be changed with the minrelaytxfee option. Note that previous releases incorrectly used the mintxfee setting to determine which low-priority transactions should be considered for inclusion in blocks.
The wallet code still uses a default fee for low-priority transactions of 0.1mBTC per kilobyte. During periods of heavy transaction volume, even this fee may not be enough to get transactions confirmed quickly; the mintxfee option may be used to override the default.

0.9.0 Release notes

RPC:
Command-line options:
Block-chain handling and storage:
Wallet:
Mining:
Protocol and network:
Validation:
Build system:
GUI:
submitted by allex2501 to BrasilBitcoin [link] [comments]

Bitcoin Core 0.10.0 released | Wladimir | Feb 16 2015

Wladimir on Feb 16 2015:
Bitcoin Core version 0.10.0 is now available from:
https://bitcoin.org/bin/0.10.0/
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues
The whole distribution is also available as torrent:
https://bitcoin.org/bin/0.10.0/bitcoin-0.10.0.torrent
magnet:?xt=urn:btih:170c61fe09dafecfbb97cb4dccd32173383f4e68&dn;=0.10.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrading warning
Because release 0.10.0 makes use of headers-first synchronization and parallel
block download (see further), the block files and databases are not
backwards-compatible with older versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.
Notable changes

Faster synchronization
Bitcoin Core now uses 'headers-first synchronization'. This means that we first
ask peers for block headers (a total of 27 megabytes, as of December 2014) and
validate those. In a second stage, when the headers have been discovered, we
download the blocks. However, as we already know about the whole chain in
advance, the blocks can be downloaded in parallel from all available peers.
In practice, this means a much faster and more robust synchronization. On
recent hardware with a decent network link, it can be as little as 3 hours
for an initial full synchronization. You may notice a slower progress in the
very first few minutes, when headers are still being fetched and verified, but
it should gain speed afterwards.
A few RPCs were added/updated as a result of this:
  • getblockchaininfo now returns the number of validated headers in addition to
the number of validated blocks.
  • getpeerinfo lists both the number of blocks and headers we know we have in
common with each peer. While synchronizing, the heights of the blocks that we
have requested from peers (but haven't received yet) are also listed as
'inflight'.
  • A new RPC getchaintips lists all known branches of the block chain,
including those we only have headers for.
Transaction fee changes
This release automatically estimates how high a transaction fee (or how
high a priority) transactions require to be confirmed quickly. The default
settings will create transactions that confirm quickly; see the new
'txconfirmtarget' setting to control the tradeoff between fees and
confirmation times. Fees are added by default unless the 'sendfreetransactions'
setting is enabled.
Prior releases used hard-coded fees (and priorities), and would
sometimes create transactions that took a very long time to confirm.
Statistics used to estimate fees and priorities are saved in the
data directory in the fee_estimates.dat file just before
program shutdown, and are read in at startup.
New command line options for transaction fee changes:
  • -txconfirmtarget=n : create transactions that have enough fees (or priority)
so they are likely to begin confirmation within n blocks (default: 1). This setting
is over-ridden by the -paytxfee option.
  • -sendfreetransactions : Send transactions as zero-fee transactions if possible
(default: 0)
New RPC commands for fee estimation:
  • estimatefee nblocks : Returns approximate fee-per-1,000-bytes needed for
a transaction to begin confirmation within nblocks. Returns -1 if not enough
transactions have been observed to compute a good estimate.
  • estimatepriority nblocks : Returns approximate priority needed for
a zero-fee transaction to begin confirmation within nblocks. Returns -1 if not
enough free transactions have been observed to compute a good
estimate.
RPC access control changes
Subnet matching for the purpose of access control is now done
by matching the binary network address, instead of with string wildcard matching.
For the user this means that -rpcallowip takes a subnet specification, which can be
  • a single IP address (e.g. 1.2.3.4 or fe80::0012:3456:789a:bcde)
  • a network/CIDR (e.g. 1.2.3.0/24 or fe80::0000/64)
  • a network/netmask (e.g. 1.2.3.4/255.255.255.0 or fe80::0012:3456:789a:bcde/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff)
An arbitrary number of -rpcallow arguments can be given. An incoming connection will be accepted if its origin address
matches one of them.
For example:
| 0.9.x and before | 0.10.x |
|--------------------------------------------|---------------------------------------|
| -rpcallowip=192.168.1.1 | -rpcallowip=192.168.1.1 (unchanged) |
| -rpcallowip=192.168.1.* | -rpcallowip=192.168.1.0/24 |
| -rpcallowip=192.168.* | -rpcallowip=192.168.0.0/16 |
| -rpcallowip=* (dangerous!) | -rpcallowip=::/0 (still dangerous!) |
Using wildcards will result in the rule being rejected with the following error in debug.log:
 Error: Invalid -rpcallowip subnet specification: *. Valid are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). 
REST interface
A new HTTP API is exposed when running with the -rest flag, which allows
unauthenticated access to public node data.
It is served on the same port as RPC, but does not need a password, and uses
plain HTTP instead of JSON-RPC.
Assuming a local RPC server running on port 8332, it is possible to request:
In every case, EXT can be bin (for raw binary data), hex (for hex-encoded
binary) or json.
For more details, see the doc/REST-interface.md document in the repository.
RPC Server "Warm-Up" Mode
The RPC server is started earlier now, before most of the expensive
intialisations like loading the block index. It is available now almost
immediately after starting the process. However, until all initialisations
are done, it always returns an immediate error with code -28 to all calls.
This new behaviour can be useful for clients to know that a server is already
started and will be available soon (for instance, so that they do not
have to start it themselves).
Improved signing security
For 0.10 the security of signing against unusual attacks has been
improved by making the signatures constant time and deterministic.
This change is a result of switching signing to use libsecp256k1
instead of OpenSSL. Libsecp256k1 is a cryptographic library
optimized for the curve Bitcoin uses which was created by Bitcoin
Core developer Pieter Wuille.
There exist attacks[1] against most ECC implementations where an
attacker on shared virtual machine hardware could extract a private
key if they could cause a target to sign using the same key hundreds
of times. While using shared hosts and reusing keys are inadvisable
for other reasons, it's a better practice to avoid the exposure.
OpenSSL has code in their source repository for derandomization
and reduction in timing leaks that we've eagerly wanted to use for a
long time, but this functionality has still not made its
way into a released version of OpenSSL. Libsecp256k1 achieves
significantly stronger protection: As far as we're aware this is
the only deployed implementation of constant time signing for
the curve Bitcoin uses and we have reason to believe that
libsecp256k1 is better tested and more thoroughly reviewed
than the implementation in OpenSSL.
[1] https://eprint.iacr.org/2014/161.pdf
Watch-only wallet support
The wallet can now track transactions to and from wallets for which you know
all addresses (or scripts), even without the private keys.
This can be used to track payments without needing the private keys online on a
possibly vulnerable system. In addition, it can help for (manual) construction
of multisig transactions where you are only one of the signers.
One new RPC, importaddress, is added which functions similarly to
importprivkey, but instead takes an address or script (in hexadecimal) as
argument. After using it, outputs credited to this address or script are
considered to be received, and transactions consuming these outputs will be
considered to be sent.
The following RPCs have optional support for watch-only:
getbalance, listreceivedbyaddress, listreceivedbyaccount,
listtransactions, listaccounts, listsinceblock, gettransaction. See the
RPC documentation for those methods for more information.
Compared to using getrawtransaction, this mechanism does not require
-txindex, scales better, integrates better with the wallet, and is compatible
with future block chain pruning functionality. It does mean that all relevant
addresses need to added to the wallet before the payment, though.
Consensus library
Starting from 0.10.0, the Bitcoin Core distribution includes a consensus library.
The purpose of this library is to make the verification functionality that is
critical to Bitcoin's consensus available to other applications, e.g. to language
bindings such as [python-bitcoinlib](https://pypi.python.org/pypi/python-bitcoinlib) or
alternative node implementations.
This library is called libbitcoinconsensus.so (or, .dll for Windows).
Its interface is defined in the C header [bitcoinconsensus.h](https://github.com/bitcoin/bitcoin/blob/0.10/src/script/bitcoinconsensus.h).
In its initial version the API includes two functions:
  • bitcoinconsensus_verify_script verifies a script. It returns whether the indicated input of the provided serialized transaction
correctly spends the passed scriptPubKey under additional constraints indicated by flags
  • bitcoinconsensus_version returns the API version, currently at an experimental 0
The functionality is planned to be extended to e.g. UTXO management in upcoming releases, but the interface
for existing methods should remain stable.
Standard script rules relaxed for P2SH addresses
The IsStandard() rules have been almost completely removed for P2SH
redemption scripts, allowing applications to make use of any valid
script type, such as "n-of-m OR y", hash-locked oracle addresses, etc.
While the Bitcoin protocol has always supported these types of script,
actually using them on mainnet has been previously inconvenient as
standard Bitcoin Core nodes wouldn't relay them to miners, nor would
most miners include them in blocks they mined.
bitcoin-tx
It has been observed that many of the RPC functions offered by bitcoind are
"pure functions", and operate independently of the bitcoind wallet. This
included many of the RPC "raw transaction" API functions, such as
createrawtransaction.
bitcoin-tx is a newly introduced command line utility designed to enable easy
manipulation of bitcoin transactions. A summary of its operation may be
obtained via "bitcoin-tx --help" Transactions may be created or signed in a
manner similar to the RPC raw tx API. Transactions may be updated, deleting
inputs or outputs, or appending new inputs and outputs. Custom scripts may be
easily composed using a simple text notation, borrowed from the bitcoin test
suite.
This tool may be used for experimenting with new transaction types, signing
multi-party transactions, and many other uses. Long term, the goal is to
deprecate and remove "pure function" RPC API calls, as those do not require a
server round-trip to execute.
Other utilities "bitcoin-key" and "bitcoin-script" have been proposed, making
key and script operations easily accessible via command line.
Mining and relay policy enhancements
Bitcoin Core's block templates are now for version 3 blocks only, and any mining
software relying on its getblocktemplate must be updated in parallel to use
libblkmaker either version 0.4.2 or any version from 0.5.1 onward.
If you are solo mining, this will affect you the moment you upgrade Bitcoin
Core, which must be done prior to BIP66 achieving its 951/1001 status.
If you are mining with the stratum mining protocol: this does not affect you.
If you are mining with the getblocktemplate protocol to a pool: this will affect
you at the pool operator's discretion, which must be no later than BIP66
achieving its 951/1001 status.
The prioritisetransaction RPC method has been added to enable miners to
manipulate the priority of transactions on an individual basis.
Bitcoin Core now supports BIP 22 long polling, so mining software can be
notified immediately of new templates rather than having to poll periodically.
Support for BIP 23 block proposals is now available in Bitcoin Core's
getblocktemplate method. This enables miners to check the basic validity of
their next block before expending work on it, reducing risks of accidental
hardforks or mining invalid blocks.
Two new options to control mining policy:
  • -datacarrier=0/1 : Relay and mine "data carrier" (OP_RETURN) transactions
if this is 1.
  • -datacarriersize=n : Maximum size, in bytes, we consider acceptable for
"data carrier" outputs.
The relay policy has changed to more properly implement the desired behavior of not
relaying free (or very low fee) transactions unless they have a priority above the
AllowFreeThreshold(), in which case they are relayed subject to the rate limiter.
BIP 66: strict DER encoding for signatures
Bitcoin Core 0.10 implements BIP 66, which introduces block version 3, and a new
consensus rule, which prohibits non-DER signatures. Such transactions have been
non-standard since Bitcoin v0.8.0 (released in February 2013), but were
technically still permitted inside blocks.
This change breaks the dependency on OpenSSL's signature parsing, and is
required if implementations would want to remove all of OpenSSL from the
consensus code.
The same miner-voting mechanism as in BIP 34 is used: when 751 out of a
sequence of 1001 blocks have version number 3 or higher, the new consensus
rule becomes active for those blocks. When 951 out of a sequence of 1001
blocks have version number 3 or higher, it becomes mandatory for all blocks.
Backward compatibility with current mining software is NOT provided, thus miners
should read the first paragraph of "Mining and relay policy enhancements" above.
0.10.0 Change log

Detailed release notes follow. This overview includes changes that affect external
behavior, not code moves, refactors or string updates.
RPC:
  • f923c07 Support IPv6 lookup in bitcoin-cli even when IPv6 only bound on localhost
  • b641c9c Fix addnode "onetry": Connect with OpenNetworkConnection
  • 171ca77 estimatefee / estimatepriority RPC methods
  • b750cf1 Remove cli functionality from bitcoind
  • f6984e8 Add "chain" to getmininginfo, improve help in getblockchaininfo
  • 99ddc6c Add nLocalServices info to RPC getinfo
  • cf0c47b Remove getwork() RPC call
  • 2a72d45 prioritisetransaction
  • e44fea5 Add an option -datacarrier to allow users to disable relaying/mining data carrier transactions
  • 2ec5a3d Prevent easy RPC memory exhaustion attack
  • d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation
  • 83f3543 Added argument to listaccounts to include watchonly addresses
  • 952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address
  • d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses
  • f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation
  • 0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account
  • 6c37f7f getrawchangeaddress: fail when keypool exhausted and wallet locked
  • ff6a7af getblocktemplate: longpolling support
  • c4a321f Add peerid to getpeerinfo to allow correlation with the logs
  • 1b4568c Add vout to ListTransactions output
  • b33bd7a Implement "getchaintips" RPC command to monitor blockchain forks
  • 733177e Remove size limit in RPC client, keep it in server
  • 6b5b7cb Categorize rpc help overview
  • 6f2c26a Closely track mempool byte total. Add "getmempoolinfo" RPC
  • aa82795 Add detailed network info to getnetworkinfo RPC
  • 01094bd Don't reveal whether password is <20 or >20 characters in RPC
  • 57153d4 rpc: Compute number of confirmations of a block from block height
  • ff36cbe getnetworkinfo: export local node's client sub-version string
  • d14d7de SanitizeString: allow '(' and ')'
  • 31d6390 Fixed setaccount accepting foreign address
  • b5ec5fe update getnetworkinfo help with subversion
  • ad6e601 RPC additions after headers-first
  • 33dfbf5 rpc: Fix leveldb iterator leak, and flush before gettxoutsetinfo
  • 2aa6329 Enable customising node policy for datacarrier data size with a -datacarriersize option
  • f877aaa submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock
  • e69a587 submitblock: Support for returning specific rejection reasons
  • af82884 Add "warmup mode" for RPC server
  • e2655e0 Add unauthenticated HTTP REST interface to public blockchain data
  • 683dc40 Disable SSLv3 (in favor of TLS) for the RPC client and server
  • 44b4c0d signrawtransaction: validate private key
  • 9765a50 Implement BIP 23 Block Proposal
  • f9de17e Add warning comment to getinfo
Command-line options:
  • ee21912 Use netmasks instead of wildcards for IP address matching
  • deb3572 Add -rpcbind option to allow binding RPC port on a specific interface
  • 96b733e Add -version option to get just the version
  • 1569353 Add -stopafterblockimport option
  • 77cbd46 Let -zapwallettxes recover transaction meta data
  • 1c750db remove -tor compatibility code (only allow -onion)
  • 4aaa017 rework help messages for fee-related options
  • 4278b1d Clarify error message when invalid -rpcallowip
  • 6b407e4 -datadir is now allowed in config files
  • bdd5b58 Add option -sysperms to disable 077 umask (create new files with system default umask)
  • cbe39a3 Add "bitcoin-tx" command line utility and supporting modules
  • dbca89b Trigger -alertnotify if network is upgrading without you
  • ad96e7c Make -reindex cope with out-of-order blocks
  • 16d5194 Skip reindexed blocks individually
  • ec01243 --tracerpc option for regression tests
  • f654f00 Change -genproclimit default to 1
  • 3c77714 Make -proxy set all network types, avoiding a connect leak
  • 57be955 Remove -printblock, -printblocktree, and -printblockindex
  • ad3d208 remove -maxorphanblocks config parameter since it is no longer functional
Block and transaction handling:
  • 7a0e84d ProcessGetData(): abort if a block file is missing from disk
  • 8c93bf4 LoadBlockIndexDB(): Require block db reindex if any blk*.dat files are missing
  • 77339e5 Get rid of the static chainMostWork (optimization)
  • 4e0eed8 Allow ActivateBestChain to release its lock on cs_main
  • 18e7216 Push cs_mains down in ProcessBlock
  • fa126ef Avoid undefined behavior using CFlatData in CScript serialization
  • 7f3b4e9 Relax IsStandard rules for pay-to-script-hash transactions
  • c9a0918 Add a skiplist to the CBlockIndex structure
  • bc42503 Use unordered_map for CCoinsViewCache with salted hash (optimization)
  • d4d3fbd Do not flush the cache after every block outside of IBD (optimization)
  • ad08d0b Bugfix: make CCoinsViewMemPool support pruned entries in underlying cache
  • 5734d4d Only remove actualy failed blocks from setBlockIndexValid
  • d70bc52 Rework block processing benchmark code
  • 714a3e6 Only keep setBlockIndexValid entries that are possible improvements
  • ea100c7 Reduce maximum coinscache size during verification (reduce memory usage)
  • 4fad8e6 Reject transactions with excessive numbers of sigops
  • b0875eb Allow BatchWrite to destroy its input, reducing copying (optimization)
  • 92bb6f2 Bypass reloading blocks from disk (optimization)
  • 2e28031 Perform CVerifyDB on pcoinsdbview instead of pcoinsTip (reduce memory usage)
  • ab15b2e Avoid copying undo data (optimization)
  • 341735e Headers-first synchronization
  • afc32c5 Fix rebuild-chainstate feature and improve its performance
  • e11b2ce Fix large reorgs
  • ed6d1a2 Keep information about all block files in memory
  • a48f2d6 Abstract context-dependent block checking from acceptance
  • 7e615f5 Fixed mempool sync after sending a transaction
  • 51ce901 Improve chainstate/blockindex disk writing policy
  • a206950 Introduce separate flushing modes
  • 9ec75c5 Add a locking mechanism to IsInitialBlockDownload to ensure it never goes from false to true
  • 868d041 Remove coinbase-dependant transactions during reorg
  • 723d12c Remove txn which are invalidated by coinbase maturity during reorg
  • 0cb8763 Check against MANDATORY flags prior to accepting to mempool
  • 8446262 Reject headers that build on an invalid parent
  • 008138c Bugfix: only track UTXO modification after lookup
P2P protocol and network code:
  • f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails
  • c30329a Add testnet DNS seed of Alex Kotenko
  • 45a4baf Add testnet DNS seed of Andreas Schildbach
  • f1920e8 Ping automatically every 2 minutes (unconditionally)
  • 806fd19 Allocate receive buffers in on the fly
  • 6ecf3ed Display unknown commands received
  • aa81564 Track peers' available blocks
  • caf6150 Use async name resolving to improve net thread responsiveness
  • 9f4da19 Use pong receive time rather than processing time
  • 0127a9b remove SOCKS4 support from core and GUI, use SOCKS5
  • 40f5cb8 Send rejects and apply DoS scoring for errors in direct block validation
  • dc942e6 Introduce whitelisted peers
  • c994d2e prevent SOCKET leak in BindListenPort()
  • a60120e Add built-in seeds for .onion
  • 60dc8e4 Allow -onlynet=onion to be used
  • 3a56de7 addrman: Do not propagate obviously poor addresses onto the network
  • 6050ab6 netbase: Make SOCKS5 negotiation interruptible
  • 604ee2a Remove tx from AlreadyAskedFor list once we receive it, not when we process it
  • efad808 Avoid reject message feedback loops
  • 71697f9 Separate protocol versioning from clientversion
  • 20a5f61 Don't relay alerts to peers before version negotiation
  • b4ee0bd Introduce preferred download peers
  • 845c86d Do not use third party services for IP detection
  • 12a49ca Limit the number of new addressses to accumulate
  • 35e408f Regard connection failures as attempt for addrman
  • a3a7317 Introduce 10 minute block download timeout
  • 3022e7d Require sufficent priority for relay of free transactions
  • 58fda4d Update seed IPs, based on bitcoin.sipa.be crawler data
  • 18021d0 Remove bitnodes.io from dnsseeds.
Validation:
  • 6fd7ef2 Also switch the (unused) verification code to low-s instead of even-s
  • 584a358 Do merkle root and txid duplicates check simultaneously
  • 217a5c9 When transaction outputs exceed inputs, show the offending amounts so as to aid debugging
  • f74fc9b Print input index when signature validation fails, to aid debugging
  • 6fd59ee script.h: set_vch() should shift a >32 bit value
  • d752ba8 Add SCRIPT_VERIFY_SIGPUSHONLY (BIP62 rule 2) (test only)
  • 698c6ab Add SCRIPT_VERIFY_MINIMALDATA (BIP62 rules 3 and 4) (test only)
  • ab9edbd script: create sane error return codes for script validation and remove logging
  • 219a147 script: check ScriptError values in script tests
  • 0391423 Discourage NOPs reserved for soft-fork upgrades
  • 98b135f Make STRICTENC invalid pubkeys fail the script rather than the opcode
  • 307f7d4 Report script evaluation failures in log and reject messages
  • ace39db consensus: guard against openssl's new strict DER checks
  • 12b7c44 Improve robustness of DER recoding code
  • 76ce5c8 fail immediately on an empty signature
Build system:
  • f25e3ad Fix build in OS X 10.9
  • 65e8ba4 build: Switch to non-recursive make
  • 460b32d build: fix broken boost chrono check on some platforms
  • 9ce0774 build: Fix windows configure when using --with-qt-libdir
  • ea96475 build: Add mention of --disable-wallet to bdb48 error messages
  • 1dec09b depends: add shared dependency builder
  • c101c76 build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix
  • e432a5f build: add option for reducing exports (v2)
  • 6134b43 Fixing condition 'sabotaging' MSVC build
  • af0bd5e osx: fix signing to make Gatekeeper happy (again)
  • a7d1f03 build: fix dynamic boost check when --with-boost= is used
  • d5fd094 build: fix qt test build when libprotobuf is in a non-standard path
  • 2cf5f16 Add libbitcoinconsensus library
  • 914868a build: add a deterministic dmg signer
  • 2d375fe depends: bump openssl to 1.0.1k
  • b7a4ecc Build: Only check for boost when building code that requires it
Wallet:
  • b33d1f5 Use fee/priority estimates in wallet CreateTransaction
  • 4b7b1bb Sanity checks for estimates
  • c898846 Add support for watch-only addresses
  • d5087d1 Use script matching rather than destination matching for watch-only
  • d88af56 Fee fixes
  • a35b55b Dont run full check every time we decrypt wallet
  • 3a7c348 Fix make_change to not create half-satoshis
  • f606bb9 fix a possible memory leak in CWalletDB::Recover
  • 870da77 fix possible memory leaks in CWallet::EncryptWallet
  • ccca27a Watch-only fixes
  • 9b1627d [Wallet] Reduce minTxFee for transaction creation to 1000 satoshis
  • a53fd41 Deterministic signing
  • 15ad0b5 Apply AreSane() checks to the fees from the network
  • 11855c1 Enforce minRelayTxFee on wallet created tx and add a maxtxfee option
GUI:
  • c21c74b osx: Fix missing dock menu with qt5
  • b90711c Fix Transaction details shows wrong To:
  • 516053c Make links in 'About Bitcoin Core' clickable
  • bdc83e8 Ensure payment request network matches client network
  • 65f78a1 Add GUI view of peer information
  • 06a91d9 VerifyDB progress reporting
  • fe6bff2 Add BerkeleyDB version info to RPCConsole
  • b917555 PeerTableModel: Fix potential deadlock. #4296
  • dff0e3b Improve rpc console history behavior
  • 95a9383 Remove CENT-fee-rule from coin control completely
  • 56b07d2 Allow setting listen via GUI
  • d95ba75 Log messages with type>QtDebugMsg as non-debug
  • 8969828 New status bar Unit Display Control and related changes
  • 674c070 seed OpenSSL PNRG with Windows event data
  • 509f926 Payment request parsing on startup now only changes network if a valid network name is specified
  • acd432b Prevent balloon-spam after rescan
  • 7007402 Implement SI-style (thin space) thoudands separator
  • 91cce17 Use fixed-point arithmetic in amount spinbox
  • bdba2dd Remove an obscure option no-one cares about
  • bd0aa10 Replace the temporary file hack currently used to change Bitcoin-Qt's dock icon (OS X) with a buffer-based solution
  • 94e1b9e Re-work overviewpage UI
  • 8bfdc9a Better looking trayicon
  • b197bf3 disable tray interactions when client model set to 0
  • 1c5f0af Add column Watch-only to transactions list
  • 21f139b Fix tablet crash. closes #4854
  • e84843c Broken addresses on command line no longer trigger testnet
  • a49f11d Change splash screen to normal window
  • 1f9be98 Disable App Nap on OSX 10.9+
  • 27c3e91 Add proxy to options overridden if necessary
  • 4bd1185 Allow "emergency" shutdown during startup
  • d52f072 Don't show wallet options in the preferences menu when running with -disablewallet
  • 6093aa1 Qt: QProgressBar CPU-Issue workaround
  • 0ed9675 [Wallet] Add global boolean whether to send free transactions (default=true)
  • ed3e5e4 [Wallet] Add global boolean whether to pay at least the custom fee (default=true)
  • e7876b2 [Wallet] Prevent user from paying a non-sense fee
  • c1c9d5b Add Smartfee to GUI
  • e0a25c5 Make askpassphrase dialog behave more sanely
  • 94b362d On close of splashscreen interrupt verifyDB
  • b790d13 English translation update
  • 8543b0d Correct tooltip on address book page
Tests:
  • b41e594 Fix script test handling of empty scripts
  • d3a33fc Test CHECKMULTISIG with m == 0 and n == 0
  • 29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag
  • 6380180 Add rejection of non-null CHECKMULTISIG dummy values
  • 21bf3d2 Add tests for BoostAsioToCNetAddr
  • b5ad5e7 Add Python test for -rpcbind and -rpcallowip
  • 9ec0306 Add CODESEPARATOFindAndDelete() tests
  • 75ebced Added many rpc wallet tests
  • 0193fb8 Allow multiple regression tests to run at once
  • 92a6220 Hook up sanity checks
  • 3820e01 Extend and move all crypto tests to crypto_tests.cpp
  • 3f9a019 added list/get received by address/ account tests
  • a90689f Remove timing-based signature cache unit test
  • 236982c Add skiplist unit tests
  • f4b00be Add CChain::GetLocator() unit test
  • b45a6e8 Add test for getblocktemplate longpolling
  • cdf305e Set -discover=0 in regtest framework
  • ed02282 additional test for OP_SIZE in script_valid.json
  • 0072d98 script tests: BOOLAND, BOOLOR decode to integer
  • 833ff16 script tests: values that overflow to 0 are true
  • 4cac5db script tests: value with trailing 0x00 is true
  • 89101c6 script test: test case for 5-byte bools
  • d2d9dc0 script tests: add tests for CHECKMULTISIG limits
  • d789386 Add "it works" test for bitcoin-tx
  • df4d61e Add bitcoin-tx tests
  • aa41ac2 Test IsPushOnly() with invalid push
  • 6022b5d Make script_{valid,invalid}.json validation flags configurable
  • 8138cbe Add automatic script test generation, and actual checksig tests
  • ed27e53 Add coins_tests with a large randomized CCoinViewCache test
  • 9df9cf5 Make SCRIPT_VERIFY_STRICTENC compatible with BIP62
  • dcb9846 Extend getchaintips RPC test
  • 554147a Ensure MINIMALDATA invalid tests can only fail one way
  • dfeec18 Test every numeric-accepting opcode for correct handling of the numeric minimal encoding rule
  • 2b62e17 Clearly separate PUSHDATA and numeric argument MINIMALDATA tests
  • 16d78bd Add valid invert of invalid every numeric opcode tests
  • f635269 tests: enable alertnotify test for Windows
  • 7a41614 tests: allow rpc-tests to get filenames for bitcoind and bitcoin-cli from the environment
  • 5122ea7 tests: fix forknotify.py on windows
  • fa7f8cd tests: remove old pull-tester scripts
  • 7667850 tests: replace the old (unused since Travis) tests with new rpc test scripts
  • f4e0aef Do signature-s negation inside the tests
  • 1837987 Optimize -regtest setgenerate block generation
  • 2db4c8a Fix node ranges in the test framework
  • a8b2ce5 regression test only setmocktime RPC call
  • daf03e7 RPC tests: create initial chain with specific timestamps
  • 8656dbb Port/fix txnmall.sh regression test
  • ca81587 Test the exact order of CHECKMULTISIG sig/pubkey evaluation
  • 7357893 Prioritize and display -testsafemode status in UI
  • f321d6b Add key generation/verification to ECC sanity check
  • 132ea9b miner_tests: Disable checkpoints so they don't fail the subsidy-change test
  • bc6cb41 QA RPC tests: Add tests block block proposals
  • f67a9ce Use deterministically generated script tests
  • 11d7a7d [RPC] add rpc-test for http keep-alive (persistent connections)
  • 34318d7 RPC-test based on invalidateblock for mempool coinbase spends
  • 76ec867 Use actually valid transactions for script tests
  • c8589bf Add actual signature tests
  • e2677d7 Fix smartfees test for change to relay policy
  • 263b65e tests: run sanity checks in tests too
Miscellaneous:
  • 122549f Fix incorrect checkpoint data for testnet3
  • 5bd02cf Log used config file to debug.log on startup
  • 68ba85f Updated Debian example bitcoin.conf with config from wiki + removed some cruft and updated comments
  • e5ee8f0 Remove -beta suffix
  • 38405ac Add comment regarding experimental-use service bits
  • be873f6 Issue warning if collecting RandSeed data failed
  • 8ae973c Allocate more space if necessary in RandSeedAddPerfMon
  • 675bcd5 Correct comment for 15-of-15 p2sh script size
  • fda3fed libsecp256k1 integration
  • 2e36866 Show nodeid instead of addresses in log (for anonymity) unless otherwise requested
  • cd01a5e Enable paranoid corruption checks in LevelDB >= 1.16
  • 9365937 Add comment about never updating nTimeOffset past 199 samples
  • 403c1bf contrib: remove getwork-based pyminer (as getwork API call has been removed)
  • 0c3e101 contrib: Added systemd .service file in order to help distributions integrate bitcoind
  • 0a0878d doc: Add new DNSseed policy
  • 2887bff Update coding style and add .clang-format
  • 5cbda4f Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope
  • b4a72a7 contrib/linearize: split output files based on new-timestamp-year or max-file-size
  • e982b57 Use explicit fflush() instead of setvbuf()
  • 234bfbf contrib: Add init scripts and docs for Upstart and OpenRC
  • 01c2807 Add warning about the merkle-tree algorithm duplicate txid flaw
  • d6712db Also create pid file in non-daemon mode
  • 772ab0e contrib: use batched JSON-RPC in linarize-hashes (optimization)
  • 7ab4358 Update bash-completion for v0.10
  • 6e6a36c contrib: show pull # in prompt for github-merge script
  • 5b9f842 Upgrade leveldb to 1.18, make chainstate databases compatible between ARM and x86 (issue #2293)
  • 4e7c219 Catch UTXO set read errors and shutdown
  • 867c600 Catch LevelDB errors during flush
  • 06ca065 Fix CScriptID(const CScript& in) in empty script case
Credits

Thanks to everyone who contributed to this release:
  • 21E14
  • Adam Weiss
  • Aitor Pazos
  • Alexander Jeng
  • Alex Morcos
  • Alon Muroch
  • Andreas Schildbach
  • Andrew Poelstra
  • Andy Alness
  • Ashley Holman
  • Benedict Chan
  • Ben Holden-Crowther
  • Bryan Bishop
  • BtcDrak
  • Christian von Roques
  • Clinton Christian
  • Cory Fields
  • Cozz Lovan
  • daniel
  • Daniel Kraft
  • David Hill
  • Derek701
  • dexX7
  • dllud
  • Dominyk Tiller
  • Doug
  • elichai
  • elkingtowa
  • ENikS
  • Eric Shaw
  • Federico Bond
  • Francis GASCHET
  • Gavin Andresen
  • Giuseppe Mazzotta
  • Glenn Willen
  • Gregory Maxwell
  • gubatron
  • HarryWu
  • himynameismartin
  • Huang Le
  • Ian Carroll
  • imharrywu
  • Jameson Lopp
  • Janusz Lenar
  • JaSK
  • Jeff Garzik
  • JL2035
  • Johnathan Corgan
  • Jonas Schnelli
  • jtimon
  • Julian Haight
  • Kamil Domanski
  • kazcw
  • kevin
  • kiwigb
  • Kosta Zertsekel
  • LongShao007
  • Luke Dashjr
  • Mark Friedenbach
  • Mathy Vanvoorden
  • Matt Corallo
  • Matthew Bogosian
  • Micha
  • Michael Ford
  • Mike Hearn
  • mrbandrews
  • mruddy
  • ntrgn
  • Otto Allmendinger
  • paveljanik
  • Pavel Vasin
  • Peter Todd
  • phantomcircuit
  • Philip Kaufmann
  • Pieter Wuille
  • pryds
  • randy-waterhouse
  • R E Broadley
  • Rose Toomey
  • Ross Nicoll
  • Roy Badami
  • Ruben Dario Ponticelli
  • Rune K. Svendsen
  • Ryan X. Charles
  • Saivann
  • sandakersmann
  • SergioDemianLerner
  • shshshsh
  • sinetek
  • Stuart Cardall
  • Suhas Daftuar
  • Tawanda Kembo
  • Teran McKinney
  • tm314159
  • Tom Harding
  • Trevin Hofmann
  • Whit J
  • Wladimir J. van der Laan
  • Yoichi Hirai
  • Zak Wilcox
As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/).
Also lots of thanks to the bitcoin.org website team David A. Harding and Saivann Carignan.
Wladimir
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-February/007480.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

Database corruption + key export + restore = missing BTC?

I was having a problem with database corruption using the bitcoin-qt client after installing 0.8.5. Prior to upgrading, I had exported my pub and priv keys as a backup. I have several other backups of my wallet.dat file as well.
I deleted the %appdata%\Bitcoin folder to recreate it with the new 0.8.5 install.
After the reinstall, I imported my key and the balance was off by around 2 BTC.
I verified it wasn't just a client thing by importing the key into blockchain.info as well. Same. Missing around 2 BTC.
Does anyone know how this could have happened? I thought that if I had the pub/priv keys, I had the wallet and everything in it. Is that not the case?
I don't have much money so the stuff I do have I try to hold on to! This is pretty upsetting...
submitted by somerandomcanuckle to BitcoinWallet [link] [comments]

Bitcoin Core: Data Directory of Old Hard Drive with Bitcoin Blockchain Configuration Bitcoin Wallet Recovery How to recover funds from a currupted bitcoin wallet Hack bitcoin (private script) 2019 Bitcoin-QT wallet review

A block chain is a transaction database shared by all nodes participating in a system based on the Bitcoin protocol. A full copy of a currency's block chain contains every transaction ever executed in the currency. With this information, one can find out how much value belonged to each address at any point in history.. Every block contains a hash of the previous block. The bitcoin qt client was catching up with the blockchain (5 days worth), when after maybe 15 minutes, it comes up with an error, "database corrupted" or something along the lines of that. I looked it up and users said to delete everthing in my %appdata/roaming/bitcoin% directy except the wallet.dat file. I am using Bitcoin-Qt v0.8.2-beta on Mac with Mountain Lion (10.8.4), and my database gets corrupted every time I restart the Mac -.-However, Bitcoin-Qt "just" recreates (?? don't know what the english word is, sorry) the Blockchain/Database (which always takes like 3 or 4 days) but no money is gone. ***Bitcoin Qt Database Corrupt How To Buy Bitcoin As A Gift Trace Bitcoin Bitcoin Qt Database Corrupt Get Free Bitcoins Online Bitcoin Or Bitcoin Cash Bitcoin Apps Iphone ★ Bitcoin Qt Database Corrupt Litecoin Vs Bitcoin Mining Bitcoin How Long To Confirm Bitcoin Qt Database Corrupt Win 1 Bitcoin What Is Bitcoin Valued Against Where Do Bitcoins Get Their Value Why GitHub? Features →. Code review; Project management; Integrations; Actions; Packages; Security

[index] [35553] [26903] [28648] [18390] [45217] [26390] [24143] [32664] [3621] [45545]

Bitcoin Core: Data Directory of Old Hard Drive with Bitcoin Blockchain Configuration

Using salvagewallet to save a corrupt Bitcoin Wallet file - Duration: 7:55. Bitcoin Daytrader 1,303 views. 7:55 . 8000 Bitcoin Wallet - Mined in 2009 and Never Moved - Duration: 6:54. WORRR 3,234 ... Communicate with Bitcoin-qt using C# - .NET bitcoin key database bitcoin key finder bitcoin key length bitcoin key algorithm bitcoin api key bitcoin alert key bitcoin alert key compromised bitcoin-all-key-generator bitcoin adder key bitcoin ... This is a tutorial video on how to backup your BLOCKCHAIN FILES. By backing up your blockchain files this will speed up the syncing process if your wallet gets corrupted. PLEASE NOTE: We recommend ... My Second Channel: https://www.youtube.com/channel/UCvXjP6h0_4CSBPVgHqfO-UA ----- Supp...

#