List of address prefixes - Bitcoin Wiki

Scalenet and Testnet4 are online and open for business

Over the years, some people have made use of testnet3 to test out scaling performance, and have spammed testnet3 with 32 MB blocks. This has caused testnet3 to get kinda bloated; the blockchain now takes an hour or so to sync, which slows down development. Other people have wanted to do stress testing, but have specifically wanted to avoid inconveniencing other people by spamming testnet3, and have therefore not done so. This slows down development too. To address this issue, I created two new networks: testnet4 and scalenet.
Testnet4 is intended to be a low-volume quick-syncing blockchain which is ideal for testing out new transaction formats or applications. It has a 2 MB default block size limit, and comes with aserti3 parameters that make the difficulty recover quickly to CPU-mineable levels. It should remain easy to sync on a low-end VPS or old laptop.
Scalenet is intended to be a high-volume blockchain which is ideal for spamming and stress testing software. It comes with a 256 MB initial default block size limit, and uses aserti3 parameters that make it more suitable for accurately simulating mainnet mining difficulty (though it retains the 20-minute difficulty rule). In order to prevent storage costs from getting unreasonable for a testnet, scalenet will be reset every 6-12 months by invalidating the block at height 10,001 and adding a new checkpoint. Scalenet is intended to be feasible to run on a mid-range desktop computer with some strain.
Testnet4 and scalenet are now online and essentially complete. The code for both has been merged into BCHN and Electron Cash. Testnet4 has also been successfully synced to by Knuth, Bitcoin Unlimited, and libbitcoincashj. Block explorers for both are available, thanks to Axel Gembe (who runs the code) and sickpig (who wrote the code):
http://tbch4.loping.net:3002/
http://sbch.loping.net:3003/
The testnet4 and scalenet MRs were opened on Aug 19th and Aug 27th, and both were merged on Sep 17th. Scalenet reached height 10,000 on October 3rd.
Testnet4 and Scalenet support are present in the master branch of BCHN, and will be included in the next release of BCHN. Some other software (e.g. Electron Cash) already has support in their latest release, but most is still pending.
See also: https://bitcoincashresearch.org/t/testnet4-and-scalenet/148/7
submitted by jtoomim to btc [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Alternatives to rest.bitcoin.com?

TL;DR: What are some serious alternatives to rest.bitcoin.com (free or paid) offering JSON REST API?

Having no time and resources to maintain my own full node/indexer servers, I have used multiple remote APIs to interact with the BCH blockchain. Sadly, most of them are unstable and tend to quickly die.
I have used Bitprim.org, which went out of business during last year's hard fork upgrade without prior warning and returning incorrect data to its clients. I have used bitcore.io from BitPay, which returns incorrect data for unconfirmed transactions and also has very little documentation - most of the endpoints are not documented. I have used Blockchain.com in the past but they do not support BCH. I tried using BTC.com but they do not support the CashAddress format (so I assumed it is not maintained).
Finally, the best service I used so far is rest.bitcoin.com, it has little downtime and is very well documented. The only issue I faced when I started using it is that it does not serve requests over TOR, which is not a big deal.
The problem is that its quality is decreasing over time. There is more and more downtime, they recently dropped support for testnet (trest.bitcoin.com) WITHOUT WARNING and nothing is said about this in the documentation, the site still says it is fully operational and the error message returned says nothing about the endpoint being obsolete/deprecated. Moreover, they do not seem to maintain their repo, tons of issues are open without answer, I submitted a pull request to it and have received no answecomment so far.
I am now looking for serious (reliable, documented...) alternatives. I am willing to pay for an API key. Thank you!
submitted by merc1er to btc [link] [comments]

Polkadot Launch AMA Recap

Polkadot Launch AMA Recap

The Polkadot Telegram AMA below took place on June 10, 2020

https://preview.redd.it/4ti681okap951.png?width=4920&format=png&auto=webp&s=e21f6a9a276d35bb9cdec59f46744f23c37966ef
AMA featured:
Dieter Fishbein, Ecosystem Development Lead, Web3 Foundation
Logan Saether, Technical Education, Web3 Foundation
Will Pankiewicz, Master of Validators, Parity Technologies
Moderated by Dan Reecer, Community and Growth, Polkadot & Kusama at Web3 Foundation

Transcription compiled by Theresa Boettger, Polkadot Ambassador:

Dieter Fishbein, Ecosystem Development Lead, Web3 Foundation

Dan: Hey everyone, thanks for joining us for the Polkadot Launch AMA. We have Dieter Fishbein (Head of Ecosystem Development, our business development team), Logan Saether (Technical Education), and Will Pankiewicz (Master of Validators) joining us today.
We had some great questions submitted in advance, and we’ll start by answering those and learning a bit about each of our guests. After we go through the pre-submitted questions, then we’ll open up the chat to live Q&A and the hosts will answer as many questions as they can.
We’ll start off with Dieter and ask him a set of some business-related questions.

Dieter could you introduce yourself, your background, and your role within the Polkadot ecosystem?

Dieter: I got my start in the space as a cryptography researcher at the University of Waterloo. This is where I first learned about Bitcoin and started following the space. I spent the next four years or so on the investment team for a large asset manager where I primarily focused on emerging markets. In 2017 I decided to take the plunge and join the space full-time. I worked at a small blockchain-focused VC fund and then joined the Polkadot team just over a year ago. My role at Polkadot is mainly focused on ensuring there is a vibrant community of projects building on our technology.

Q: Adoption of Polkadot of the important factors that all projects need to focus on to become more attractive to the industry. So, what is Polkadot's plan to gain more Adoption? [sic]

A (Dieter): Polkadot is fundamentally a developer-focused product so much of our adoption strategy is focused around making Polkadot an attractive product for developers. This has many elements. Right now the path for most developers to build on Polkadot is by creating a blockchain using the Substrate framework which they will later connect to Polkadot when parachains are enabled. This means that much of our adoption strategy comes down to making Substrate an attractive tool and framework. However, it’s not just enough to make building on Substrate attractive, we must also provide an incentive to these developers to actually connect their Substrate-based chain to Polkadot. Part of this incentive is the security that the Polkadot relay chain provides but another key incentive is becoming interoperable with a rich ecosystem of other projects that connect to Polkadot. This means that a key part of our adoption strategy is outreach focused. We go out there and try to convince the best projects in the space that building on our technology will provide them with significant value-add. This is not a purely technical argument. We provide significant support to projects building in our ecosystem through grants, technical support, incubatoaccelerator programs and other structured support programs such as the Substrate Builders Program (https://www.substrate.io/builders-program). I do think we really stand out in the significant, continued support that we provide to builders in our ecosystem. You can also take a look at the over 100 Grants that we’ve given from the Web3 Foundation: https://medium.com/web3foundation/web3-foundation-grants-program-reaches-100-projects-milestone-8fd2a775fd6b

Q: On moving forward through your roadmap, what are your most important next priorities? Does the Polkadot team have enough fundamentals (Funds, Community, etc.) to achieve those milestones?

A (Dieter): I would say the top priority by far is to ensure a smooth roll-out of key Polkadot features such as parachains, XCMP and other key parts of the protocol. Our recent Proof of Authority network launch was only just the beginning, it’s crucial that we carefully and successfully deploy features that allow builders to build meaningful technology. Second to that, we want to promote adoption by making more teams aware of Polkadot and how they can leverage it to build their product. Part of this comes down to the outreach that I discussed before but a major part of it is much more community-driven and many members of the team focus on this.
We are also blessed to have an awesome community to make this process easier 🙂

Q: Where can a list of Polkadot's application-specific chains can be found?

A (Dieter): The best list right now is http://www.polkaproject.com/. This is a community-led effort and the team behind it has done a terrific job. We’re also working on providing our own resource for this and we’ll share that with the community when it’s ready.

Q: Could you explain the differences and similarities between Kusama and Polkadot?

A (Dieter): Kusama is fundamentally a less robust, faster-moving version of Polkadot with less economic backing by validators. It is less robust since we will be deploying new technology to Kusama before Polkadot so it may break more frequently. It has less economic backing than Polkadot, so a network takeover is easier on Kusama than on Polkadot, lending itself more to use cases without the need for bank-like security.
In exchange for lower security and robustness, we expect the cost of a parachain lease to be lower on Kusama than Polkadot. Polkadot will always be 100% focused on security and robustness and I expect that applications that deal with high-value transactions such as those in the DeFi space will always want a Polkadot deployment, I think there will be a market for applications that are willing to trade cheap, high throughput for lower security and robustness such as those in the gaming, content distribution or social networking sectors. Check out - https://polkadot.network/kusama-polkadot-comparing-the-cousins/ for more detailed info!

Q: and for what reasons would a developer choose one over the other?

A (Dieter): Firstly, I see some earlier stage teams who are still iterating on their technology choosing to deploy to Kusama exclusively because of its lower-stakes, faster moving environment where it will be easier for them to iterate on their technology and build their user base. These will likely encompass the above sectors I identified earlier. To these teams, Polkadot becomes an eventual upgrade path for them if, and when, they are able to perfect their product, build a larger community of users and start to need the increased stability and security that Polkadot will provide.
Secondly, I suspect many teams who have their main deployment on Polkadot will also have an additional deployment on Kusama to allow them to test new features, either their tech or changes to the network, before these are deployed to Polkadot mainnet.

Logan Saether, Technical Education, Web3 Foundation

Q: Sweet, let's move over to Logan. Logan - could you introduce yourself, your background, and your role within the Polkadot ecosystem?

A (Logan): My initial involvement in the industry was as a smart contract engineer. During this time I worked on a few projects, including a reboot of the Ethereum Alarm Clock project originally by Piper Merriam. However, I had some frustrations at the time with the limitations of the EVM environment and began to look at other tools which could help me build the projects that I envisioned. This led to me looking at Substrate and completing a bounty for Web3 Foundation, after which I applied and joined the Technical Education team. My responsibilities at the Technical Education team include maintaining the Polkadot Wiki as a source of truth on the Polkadot ecosystem, creating example applications, writing technical documentation, giving talks and workshops, as well as helping initiatives such as the Thousand Validator Programme.

Q: The first technical question submitted for you was: "When will an official Polkadot mobile wallet appear?"

A (Logan): There is already an “official” wallet from Parity Technologies called the Parity Signer. Parity Signer allows you to keep your private keys on an air-gapped mobile device and to interactively sign messages using web interfaces such as Polkadot JS Apps. If you’re looking for something that is more of an interface to the blockchain as well as a wallet, you might be interested in PolkaWallet which is a community team that is building a full mobile interface for Polkadot.
For more information on Parity Signer check out the website: https://www.parity.io/signe

Q: Great thanks...our next question is: If someone already developed an application to run on Ethereum, but wants the interoperability that Polkadot will offer, are there any advantages to rebuilding with Substrate to run as a parachain on the Polkadot network instead of just keeping it on Ethereum and using the Ethereum bridge for use with Polkadot?

A (Logan): Yes, the advantage you would get from building on Substrate is more control over how your application will interact with the greater Polkadot ecosystem, as well as a larger design canvas for future iterations of your application.
Using an Ethereum bridge will probably have more cross chain latency than using a Polkadot parachain directly. The reason for this is due to the nature of Ethereum’s separate consensus protocol from Polkadot. For parachains, messages can be sent to be included in the next block with guarantees that they will be delivered. On bridged chains, your application will need to go through more routes in order to execute on the desired destination. It must first route from your application on Ethereum to the Ethereum bridge parachain, and afterward dispatch the XCMP message from the Polkadot side of the parachain. In other words, an application on Ethereum would first need to cross the bridge then send a message, while an application as a parachain would only need to send the message without needing to route across an external bridge.

Q: DOT transfers won't go live until Web3 removes the Sudo module and token holders approve the proposal to unlock them. But when will staking rewards start to be distributed? Will it have to after token transfers unlock? Or will accounts be able to accumulate rewards (still locked) once the network transitions to NPoS?

A (Logan): Staking rewards will be distributed starting with the transition to NPoS. Transfers will still be locked during the beginning of this phase, but reward payments are technically different from the normal transfer mechanism. You can read more about the launch process and steps at http://polkadot.network/launch-roadmap

Q: Next question is: I'm interested in how Cumulus/parachain development is going. ETA for when we will see the first parachain registered working on Kusama or some other public testnet like Westend maybe?

A (Logan): Parachains and Cumulus is a current high priority development objective of the Parity team. There have already been PoC parachains running with Cumulus on local testnets for months. The current work now is making the availability and validity subprotocols production ready in the Polkadot client. The best way to stay up to date would be to follow the project boards on GitHub that have delineated all of the tasks that should be done. Ideally, we can start seeing parachains on Westend soon with the first real parachains being deployed on Kusama thereafter.
The projects board can be viewed here: https://github.com/paritytech/polkadot/projects
Dan: Also...check out Basti's tweet from yesterday on the Cumulus topic: https://twitter.com/bkchstatus/1270479898696695808?s=20

Q: In what ways does Polkadot support smart contracts?

A (Logan): The philosophy behind the Polkadot Relay Chain is to be as minimal as possible, but allow arbitrary logic at the edges in the parachains. For this reason, Polkadot does not support smart contracts natively on the Relay Chain. However, it will support smart contracts on parachains. There are already a couple major initiatives out there. One initiative is to allow EVM contracts to be deployed on parachains, this includes the Substrate EVM module, Parity’s Frontier, and projects such as Moonbeam. Another initiative is to create a completely new smart contract stack that is native to Substrate. This includes the Substrate Contracts pallet, and the ink! DSL for writing smart contracts.
Learn more about Substrate's compatibility layer with Ethereum smart contracts here: https://github.com/paritytech/frontier

Will Pankiewicz, Master of Validators, Parity Technologies


Q: (Dan) Thanks for all the answers. Now we’ll start going through some staking questions with Will related to validating and nominating on Polkadot. Will - could you introduce yourself, your background, and your role within the Polkadot ecosystem?

A (Will): Sure thing. Like many others, Bitcoin drew me in back in 2013, but it wasn't until Ethereum came that I took the deep dive into working in the space full time. It was the financial infrastructure aspects of cryptocurrencies I was initially interested in, and first worked on dexes, algorithmic trading, and crypto funds. I really liked the idea of "Generalized Mining" that CoinFund came up with, and started to explore the whacky ways the crypto funds and others can both support ecosystems and be self-sustaining at the same time. This drew me to a lot of interesting experiments in what later became DeFi, as well as running validators on Proof of Stake networks. My role in the Polkadot ecosystem as “Master of Validators” is ensuring the needs of our validator community get met.

Q: Cool thanks. Our first community question was "Is it still more profitable to nominate the validators with lesser stake?"

A (Will): It depends on their commission, but generally yes it is more profitable to nominate validators with lesser stake. When validators have lesser stake, when you nominate them this makes your nomination stake a higher percentage of total stake. This means when rewards get distributed, it will be split more favorably toward you, as rewards are split by total stake percentage. Our entire rewards scheme is that every era (6 hours in Kusama, 24 hours in Polkadot), a certain amount of rewards get distributed, where that amount of rewards is dependent on the total amount of tokens staked for the entire network (50% of all tokens staked is currently optimal). These rewards from the end of an era get distributed roughly equally to all validators active in the validator set. The reward given to each validator is then split between the validators and all their nominators, determined by the total stake that each entity contributes. So if you contribute to a higher percentage of the total stake, you will earn more rewards.

Q: What does priority ranking under nominator addresses mean? For example, what does it mean that nominator A has priority 1 and nominator B has priority 6?

A (Will): Priority ranking is just the index of the nomination that gets stored on chain. It has no effect on how stake gets distributed in Phragmen or how rewards get calculated. This is only the order that the nominator chose their validators. The way that stake from a nominator gets distributed from a nominator to validators is via Phragmen, which is an algorithm that will optimally put stake behind validators so that distribution is roughly equal to those that will get in the validator set. It will try to maximize the total amount at stake in the network and maximize the stake behind minimally staked validators.

Q: On Polkadot.js, what does it mean when there are nodes waiting on Polkadot?

**A (Will):**In Polkadot there is a fixed validator set size that is determined by governance. The way validators get in the active set is by having the highest amount of total stake relative to other validators. So if the validator set size is 100, the top 100 validators by total stake will be in the validator set. Those not active in the validator set will be considered “waiting”.

Q: Another question...Is it necessary to become a waiting validator node right now?

A (Will): It's not necessary, but highly encouraged if you actively want to validate on Polkadot. The longer you are in the waiting tab, the longer you get exposure to nominators that may nominate you.

Q: Will current validators for Kusama also validate for Polkadot? How strongly should I consider their history (with Kusama) when looking to nominate a good validator for DOTs?

A (Will): A lot of Kusama validators will also be validators for Polkadot, as KSM was initially distributed to DOT holders. The early Kusama Validators will also likely be the first Polkadot validators. Being a Kusama validator should be a strong indicator for who to nominate on Polkadot, as the chaos that has ensued with Kusama has allowed validators to battle test their infrastructure. Kusama validators by now are very familiar with tooling, block explorers, terminology, common errors, log formats, upgrades, backups, and other aspects of node operation. This gives them an edge against Polkadot validators that may be new to the ecosystem. You should strongly consider well known Kusama validators when making your choices as a nominator on Polkadot.

Q: Can you go into more details about the process for becoming a DOT validator? Is it similar as the KSM 1000 validators program?

A (Will): The Process for becoming a DOT validators is first to have DOTs. You cannot be a validator without DOTs, as DOTs are used to pay transaction fees, and the minimum amount of DOTs you need is enough to create a validate transaction. After obtaining enough DOTs, you will need to set up your validator infrastructure. Ideally you should have a validator node with specs that match what we call standard hardware, as well as one or more sentry nodes to help isolate the validator node from attacks. After the infrastructure is up and running, you should have your Polkadot accounts set up right with a stash bonded to a controller account, and then submit a validate transaction, which will tell the network your nodes are ready to be a part of the network. You should then try and build a community around your validator to let others know you are trustworthy so that they will nominate you. The 1000 validators programme for Kusama is a programme that gives a certain amount of nominations from the Web3 Foundation and Parity to help bootstrap a community and reputation for validators. There may eventually be a similar type of programme for Polkadot as well.
Dan: Thanks a lot for all the answers, Will. That’s the end of the pre-submitted questions and now we’ll open the chat up to live Q&A, and our three team members will get through as many of your questions as possible.
We will take questions related to business development, technology, validating, and staking. For those wondering about DOT:
DOT tokens do not exist yet. Allocations of Polkadot's native DOT token are technically and legally non-transferable. Hence any publicized sale of DOTs is unsanctioned by Web3 Foundation and possibly fraudulent. Any official public sale of DOTs will be announced on the Web3 Foundation website. Polkadot’s launch process started in May and full network decentralization later this year, holders of DOT allocations will determine issuance and transferability. For those who participated in previous DOT sales, you can learn how to claim your DOTs here (https://wiki.polkadot.network/docs/en/claims).


Telegram Community Follow-up Questions Addressed Below


Q: Polkadot looks good but it confuses me that there are so many other Blockchain projects. What should I pay attention in Polkadot to give it the importance it deserves? What are your planning to achieve with your project?

A (Will): Personally, what I think differentiates it is the governance process. Coordinating forkless upgrades and social coordination helps stand it apart.
A (Dieter): The wiki is awesome - https://wiki.polkadot.network/

Q: Over 10,000 ETH paid as a transaction fee , what if this happens on Polkadot? Is it possible we can go through governance to return it to the owner?

A: Anything is possible with governance including transaction reversals, if a network quorum is reached on a topic.
A (Logan): Polkadot transaction fees work differently than the fees on Ethereum so it's a bit more difficult to shoot yourself in the foot as the whale who sent this unfortunate transaction. See here for details on fees: https://w3f-research.readthedocs.io/en/latest/polkadot/Token%20Economics.html?highlight=transaction%20fees#relay-chain-transaction-fees-and-per-block-transaction-limits
However, there is a tip that the user can input themselves which they could accidentally set to a large amount. In this cases, yes, they could proposition governance to reduce the amount that was paid in the tip.

Q: What is the minimum ideal amount of DOT and KSM to have if you want to become a validator and how much technical knowledge do you need aside from following the docs?

A (Will): It depends on what the other validators in the ecosystem are staking as well as the validator set size. You just need to be in the top staking amount of the validator set size. So if its 100 validators, you need to be in the top 100 validators by stake.

Q: Will Web3 nominate validators? If yes, which criteria to be elected?

A (Will): Web 3 Foundation is running programs like the 1000 validators programme for Kusama. There's a possibility this will continue on for Polkadot as well after transfers are enabled. https://thousand-validators.kusama.network/#/
You will need to be an active validator to earn rewards. Only those active in the validator set earn rewards. I would recommend checking out parts of the wiki: https://wiki.polkadot.network/docs/en/maintain-guides-validator-payout

Q: Is it possible to implement hastables or dag with substrate?

A (Logan): Yes.

Q: Polkadot project looks very futuristic! But, could you tell us the main role of DOT Tokens in the Polkadot Ecosystem?

A (Dan): That's a good question. The short answer is Staking, Governance, Bonding. More here: http://polkadot.network/dot-token

Q: How did you manage to prove that the consensus protocol is safe and unbreakable mathematically?

A (Dieter): We have a research teams of over a dozen scientists with PhDs and post-docs in cryptography and distributed computing who do thorough theoretical analyses on all the protocols used in Polkadot

Q: What are the prospects for NFT?

A: Already being built 🙂

Q: What will be Polkadot next roadmap for 2020 ?

A (Dieter): Building. But seriously - we will continue to add many more features and upgrades to Polkadot as well as continue to strongly focus on adoption from other builders in the ecosystem 🙂
A (Will): https://polkadot.network/launch-roadmap/
This is the launch roadmap. Ideally adding parachains and xcmp towards the end of the year

Q: How Do you stay active in terms of marketing developments during this PANDEMIC? Because I'm sure you're very excited to promote more after this settles down.

A (Dan): The main impact of covid was the impact on in-person events. We have been very active on Crowdcast for webinars since 2019, so it was quite the smooth transition to all-online events. You can see our 40+ past event recordings and follow us on Crowdcast here: https://www.crowdcast.io/polkadot. If you're interested in following our emails for updates (including online events), subscribe here: https://info.polkadot.network/subscribe

Q: Hi, who do you think is your biggest competitor in the space?

A (Dan): Polkadot is a metaprotocol that hasn't been seen in the industry up until this point. We hope to elevate the industry by providing interoperability between all major public networks as well as private blockchains.

Q: Is Polkadot a friend or competitor of Ethereum?

A: Polkadot aims to elevate the whole blockchain space with serious advancements in interoperability, governance and beyond :)

Q: When will there be hardware wallet support?

A (Will): Parity Signer works well for now. Other hardware wallets will be added pretty soon

Q: What are the attractive feature of DOT project that can attract any new users ?

A: https://polkadot.network/what-is-polkadot-a-brief-introduction/
A (Will): Buidling parachains with cross chain messaging + bridges to other chains I think will be a very appealing feature for developers

Q: According to you how much time will it take for Polkadot to get into mainstream adoption and execute all the plans set for this project?

A: We are solving many problems that have held back the blockchain industry up until now. Here is a summary in basic terms:
https://preview.redd.it/ls7i0bpm8p951.png?width=752&format=png&auto=webp&s=a8eb7bf26eac964f6b9056aa91924685ff359536

Q: When will bitpie or imtoken support DOT?

A: We are working on integrations on all the biggest and best wallet providers. ;)

Q: What event/call can we track to catch a switch to nPOS? Is it only force_new_era call? Thanks.

A (Will): If you're on riot, useful channels to follow for updates like this are #polkabot:matrix.org and #polkadot-announcements:matrix.parity.io
A (Logan): Yes this is the trigger for initiating the switch to NPoS. You can also poll the ForceEra storage for when it changes to ForceNew.

Q: What strategy will the Polkadot Team use to make new users trust its platform and be part of it?

A (Will): Pushing bleeding edge cryptography from web 3 foundation research
A (Dan): https://t.me/PolkadotOfficial/43378

Q: What technology stands behind and What are its advantages?

A (Dieter): Check out https://polkadot.network/technology/ for more info on our tech stack!

Q: What problems do you see occurring in the blockchain industry nowadays and how does your project aims to solve these problems?

A (Will): Governance I see as a huge problem. For example upgrading Bitcoin and making decisions for changing things is a very challenging process. We have robust systems of on-chain governance to help solve these coordination problems

Q: How involved are the Polkadot partners? Are they helping with the development?

A (Dieter): There are a variety of groups building in the Polkadot ecosystem. Check out http://www.polkaproject.com/ for a great list.

Q: Can you explain the role of the treasury in Polkadot?

A (Will): The treasury is for projects or people that want to build things, but don't want to go through the formal legal process of raising funds from VCs or grants or what have you. You can get paid by the community to build projects for the community.
A: There’s a whole section on the wiki about the treasury and how it functions here https://wiki.polkadot.network/docs/en/mirror-learn-treasury#docsNav

Q: Any plan to introduce Polkadot on Asia, or rising market on Asia?

**A (Will):**We're globally focused

Q: What kind of impact do you expect from the Council? Although it would be elected by token holders, what kind of people you wish to see there?

A (Will): Community focused individuals like u/jam10o that want to see cool things get built and cool communities form

If you have further questions, please ask in the official Polkadot Telegram channel.
submitted by dzr9127 to dot [link] [comments]

ARK. Here's what's it's all about, what's been going on, and what's coming. [Explain Like I'm Busy]

Dude, it said explain like I'm busy I'm not going to read all this

No problem. Check out these hand-picked relevant ARK Crypto Podcast episodes. Learn while you listen, drive to work or home, cook a steak, give your dog a bath, etc.
If you have decided to read all this, thanks, keep reading for a concise breakdown!

So what's the current big thing going on with ARK right NOW?

ARK.io has recently announced on both its blog and its Twitter that ARK Core v2.6 is coming to Mainnet February 11th. The iteration of 2.6 may sound anticlimactic, but it's far from that. Core v2.6 is the biggest upgrade to date- even bigger than the total Core overhaul performed for v2.0, deployed late 2018.
The new version brings new transaction types to the ARK Public Network, including types that will play a role in creating an ecosystem of linked chains. This ecosystem of linked chains will have the ARK Public Network in the center of the action, storing chain details and allowing for chain discovery.
These new transaction types include:
Multipayments — sending to multiple ARK addresses, while just initiating one transaction, saves time and cost
Multisignatures — you can now get all of the benefits of multisignatures where more than one user can propose or spend funds depending on the predefined terms (eg. 2 out of 3 users needed to successfully send tokens, vote, …)
IPFS — register IPFS compliant hashes on the ARK blockchain within Desktop Wallet.
Business & Bridgechain registrations — you can now register your business and bridgechain on the blockchain and soon, you will be able to get verified via our Marketplace to get access to some exciting new features.
Delegate resignation — delegates who don’t want to be voted for anymore can now opt-out of this by simply initiating delegate resignation.
Additionally, the Core v2.6 improves security against double-spend attacks by implementing nonces. Also, massive enhancements were made to the GTI or Generic Transaction Interface, a critical tool for developers who wish to develop decentralized applications.

What is ARK's unique approach to current issues plaguing the blockchain industry?

ARK empowers everyone, regardless of their aim or technical background, to quickly and easily leverage blockchain technology. In the current hype-driven blockchain landscape, ARK acts as a beacon for individuals, groups, and enterprises seeking to apply blockchain technology to both reach their individual goals and affect change in their local community. ARK’s uniquely simple technology stack allows almost anyone to create and deploy standalone blockchains for any use case with an intuitive graphical user interface and experience. These newly created blockchains also known as bridgechains will have the ability to interoperate through ARK SmartBridge Technology. ARK is also reinventing smart contracts with ARK Logic, a collection of tools including custom transaction types, templates, and plugins. ARK Logic brings security, adaptability, and scalability to decentralized computing workflows. Most importantly, the ARK Ecosystem fosters a growing international community of developers, node operators, blockchains, businesses, and enthusiasts who collectively breathe life into this disruptive technology. Get into the interactive whitepaper here.

Tell me about the ARK Public Network

Ok, no problem. Since coming online on March 21, 2017, the APN has operated as a P2P cryptocurrency with fast block times of 8 seconds and low dynamic fees (near a penny and somewhat novel for a DPoS blockchain). However, the end goal of the APN far exceeds that of just a cryptocurrency that is faster and cheaper to use than Bitcoin. I'll explain further in a minute.
The network, as mentioned, is set up as Delegated Proof-of-Stake. This means forging delegates are deemed worthy to secure the chain and add blocks to it by the holders of the ARK token, which vote for delegates using their ARK as vote weight. ARK remains in users' control at all times, and the top 51 delegates in vote weight enter forging status. The network awards each delegate 2 ARK per block (~12,705 ARK/mo) for services rendered. This continues ad infinitum resulting in a declining inflation rate each year (relative to total supply). When users add or remove ARK from a voting wallet address, vote weight adjusts automatically and they don't need to vote again. Voting continues even if user's wallet is offline.
The main uses of ARK as the cryptoasset of the ARK Public Network besides being a P2P cryptocurrency include:
If you're interested in more details about APN uses, check this direct link to that section of whitepaper.

Is team good?

Yes, team good. Team very good. General sentiment among ARK team members is that ARK is a dream project to work on, and this motivates them to do great work on a consistent basis as the ARK technology stack progresses. Very recently, ARK hired an additional half dozen people in various departments, including marketing department. This brings ARK team total to over three dozen experts. The ARK business entity is also well funded with around 10 years of budget. The ARK business entity spends funds in a very sensible manner compared to some other projects who spend with insufficient foresight or discretion.
Members of the board are thoughtful and deliberate, and the CEO FX Thoorens has been hard at work putting a spotlight on ARK, showing an 'intermeshing' of ARK with the global regulatory landscape in regards to crypto. Recently, ARK became a founding member of ADAN, a professional association based in France created to help structure and develop the digital assets industry. Other members include Consensys France and Ledger. ADAN will consult with public authorities, industry leaders and private bodies to promote the use of digital assets and all activities in this sector. This includes exchange platforms, brokers, hardware, protocols, decentralized applications and blockchain technology platforms. Hear FX Thoorens talk more about this in this podcast episode.
The ARK business entity is located in France, but the ARK team is distributed across 10+ countries and multiple continents.

What's going to happen?

Cool stuff. Organizations and open source projects have been stumbling across ARK and really like what they see. Multiple projects are working with ARK technology and are at various stages of development, but since you're busy, I'll highlight the project nOS which recently launched their public testnet and uses ARK technology for their blockchain. nOS also has great things to say about ARK that you can hear in this podcast episode or watch in this video.
We believe that as more businesses, organizations, and open source projects start looking around for blockchain solutions, they will also enjoy ARK's simplicity, flexibility, and feature set. Our powerful technology stack is backed up by a recently upgraded documentation hub for developers.
The product we have that makes it very easy for projects to join the ARK Ecosystem is called the ARK Deployer, which you can learn about in this two minute video. It allows developers from all walks of life to create, customize and launch a standalone blockchain in three simple steps. In the near future, what's going to happen is a big improvement to the Deployer. The ARK Deployer will get an upgraded and more powerful user interface that also facilitates chain management post-launch, as well as interface directly with cloud providers like Digital Ocean to launch genesis node and peers in background. This would allow for a massive leap forward in our vision of 'Point. Click. Blockchain.'
ARK.io is also working on a Marketplace for developers, where custom plugins and tools developed by both ARK.io as well as third parties can be acquired for assembling blockchains much easier. Imagine a wordpress-type environment where you can create a super-powerful and customized blockchain by connecting Legos together. In the same way that early World Wide Web needed WordPress/Squarespace style tools to bring the technology to every business or organization, we believe that this need will be out there for blockchain technology as this new decade progresses.
There is more cool stuff that is going to happen, but I'll wrap it up there for now.

After reading all this stuff, what is it you want me to do?

Well, not make any financial decisions, because that is not the purpose of this information. However, as a developer, there's a lot of interesting things you should know and may want to consider doing. The ARK technology stack uses TypeScript and other JS-style frameworks, so if you know those, you should get excited.
Here's some additional less 'developery' stuff you can do:
Thanks for coming along for the ride of this post. ARK has been out here, it's out here, and it's going to continue to be out here, doing its part to make sure everybody knows that blockchains are, in fact, a thing.
submitted by doubled1c3 to ArkEcosystem [link] [comments]

aelf’s Blockchain-based Digital Asset Identification Standard approved by IEEE

aelf’s Blockchain-based Digital Asset Identification Standard approved by IEEE
Author: Ma Haobo

https://preview.redd.it/m1jtaghbqt651.png?width=1280&format=png&auto=webp&s=4dd933b2b9b79a9de0c6eaeaac42a66ec6868c7e
Recently, the Standard for Blockchain-based Digital Asset Identification, submitted by aelf, was approved by the IEEE SA Standards Board New Standards Committee (NesCom). The standard specifies methods and practices of crypto asset identification. The standard also addresses attributes of the blockchain system digit asset identification including but not limited to data structure, data format, and related asset management operation specifications.
The purpose of this standard is to improve digital asset management with an asset identification specification in blockchain systems. The standard aims to provide a data format and structure references for organizations designing digital asset identification solutions — providing digital asset services and setting up operational specifications for organizations.
Current Situation and Problems of Assets Management on the chain.
In the blockchain system, the unspecified participants usually work together under set contract rules to complete a social production and management activity on the blockchain. Some of these activities are closely related to assets, such as payments, loans, asset transactions, games and entertainment, etc. .
There are various ways to define assets within a blockchain as well as when compared to other blockchains. For example, in Ethereum, ETH is an asset that is directly constrained by the underlying code of the block chain, while a Fungible token is defined by the contract interface ERC20, and a Non-Fungible token is defined by ERC721. There are also emerging asset agreements such as ERC998 and ERC1155.
Most users utilize a blockchain through specific terminals, which usually includes a blockchain browser, wallet, decentralized applications (DAPP), etc. By defining standards through contract interfaces, these users’ terminals can handle various assets in a standardized way. These DApps usually need to adapt to different contract interfaces, but also deal with non-contract defined assets like ETH. When these terminals need to support different blockchains, they require extra work to adapt.
The number of interfaces that user terminals need to deal with is increasing with the emergence of more blockchain systems. But most functions are equivalent in the assets definition. At the same time, there is a growing need to move assets from one chain to another chain. For example, there are some BTC value anchored assets in Ethereum, USDT is issued on bitcoin network and Ethereum network at the same time, and the assets on the aelf main-chain and side-chain can be transferred directly. But there is not a unified standard to solve the cross-chain data communication problem in the whole blockchain industry.
What a common asset standard might do to an industry
The birth of wETH is a great place to talk about “industry change” . wETH, which is Wrapped Ether, is an ETH asset Wrapped under ERC20. As mentioned above, ETH is a non-contractual asset, but why redefine it under ERC20? Some decentralised exchanges in Ethereum, which typically deal with ERC20 assets. But ETH, as one of the key assets in Ethereum, also needed to be backed by these decentralised exchanges, so wETH was born. Users can get the same amount wETH after locking ETH in the contract. Accordingly, users will be able to get the same amount ETH by destroying the wETH in the contract, so users can exchange any ERC20 Token including the ETH in these decentralized exchanges. This seems to be a good solution. However the transformation operation on the chain may bring permanent system complexity.
Users’ needs will always be different. After solving the problems of Eth and wETH, people hope to adapt the transaction to BTC. Due to the isomeric chain, there is no good atomic transfer scheme so far. Most BTC assets anchored in Ethereum are anchored by mortgages. The risk of the centralized BTC mortgage scheme lies in the safe custody of the mortgaged BTC. Systematic risks associated with the Ethereum on-chain mortgaged asset revolves around price fluctuations. Moreover, each scheme is neither simple nor elegant. When simple requirements face complex solutions, we need a simple solution.
Challenges may also arise when conducting Defi activities on a single chain as Ethereum transaction volume increases. When the trading volume increased in March 2020, the Maker’s data source could not keep up with outside real prices, and some mortgage orders went awry. When a single chain is not big enough to handle a high number of data transactions, it may be better to process these assets on higher performance cross chains, such as EOS. But we can’t deal with the ERC20 assets on EOS. Of course, aelf can not currently deal with ERC20 assets.
Current blockchain systems, on-chain assets, and especially fungible tokens, have special commonalities. Some cryptocurrency wallets have achieved compatibility with multiple blockchain systems. A unified blockchain asset standard is not specific to a certain kind of blockchain system and can drastically reduce the systemic costs of the entire industry.

IEEE Digital Asset Standard Proposals Overview

The IEEE digital asset proposal, submitted by aelf, defines the digital asset standard in terms of data structure, data format specification and management operation specifications related to asset identification.
Combined with the digital assets demand of blockchain systems, such as public and alliance chains, a flexible asset standard with strong versatility and multiple options is necessary.
In this standard, some assets’ properties will be defined, such as name, supply, decimal places, etc. Some basic operations are also defined, such as distribution, destruction, migration, and so on.
At the same time, we will define the standard form of cross-chain transfers on the premise that cross-chain data can be synchronized normally. In this regard, the aelf team members are continuing to invest in research and development. The aelf team also launched the Cross-Chain Transfer Protocol (CCTP), and held cross-chain transfer testing and a hacker bounty between the Ethereum and aelf testnet.
Expectations and perspectives on digital asset standards
If such a standard can be implemented, users can use a client to process various digital assets without difference. For example, if a user got a rare item in the EOS blockchain game, he can also sell the item to get USDT in an NFT exchange on Ethereum, and then sell the USDT to buy the BTC on the unique side-chain of aelf’s decentralized exchange (BTC/USDT), where only transactions for the conversion of BTC to USDT are processed.
Based on existing mainstream blockchain systems, it is difficult to achieve pre-compatibility. The first decade of blockchain is a decade of high-speed development in which new ideas and methods are constantly emerging. Therefore, it may be difficult to implement all the functions defined in the digital assets standard when the existing blockchain is not compatible with the standard protocols.
It is hoped that the digital assets standard can be easily implemented by each blockchain system. If a function is unique to a specific blockchain system, it should not be included in the standard.
After establishing this standard, it is expected to receive increasing support from multiple chains. When blockchain technology is a common feature utilized in mainstream applications, it can speed up assets’ liquidity.
submitted by Floris-Jan to aelfofficial [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

You can call you a Bitcoiner if you know/can explain these terms...

03/Jan/2009
10 Minutes
10,000 BTC Pizza
2016 Blocks
21 Million
210,000 Blocks
51% Attack
Address
Altcoin
Antonopoulos
Asic
Asic Boost
Base58
Batching
Bech32
Bit
Bitcoin Cash
Bitcoin Improvement Proposal (BIP)
Bitcoin SV
Bitmain
Block
Block height
Block reward
Blockchain
Blockexplorer
Bloom Filter
Brain Wallet
Buidl
Change Address
Child pays for parent (CPFP)
Coinbase (not the exchange)
CoinJoin
Coinmarketcap (CMC)
Colored Coin
Confirmation
Consensus
Custodial Wallet
Craig Wright
David Kleinman
Difficulty
Difficulty adjustment
Difficulty Target
Dogecoin
Dorian Nakamoto
Double spend
Elliptic Curve Digital Signature Algorithm (ECDSA)
Ethereum
Faketoshi
Fork
Full Node
Gavin Andresen
Genesis Block
Getting goxed
Halving
Hard Fork
Hardware Wallet
Hash
Hashing
Hierarchical Deterministic (HD) Wallet
Hodl
Hot Wallet
Initial Coin Offering (ICO)
Initial Exchange Offering (IEO)
Ledger
Light Node
Lightning
Litecoin
Locktime
Mainnet
Malleability
Master Private Key
Master Public Key
Master Seed
mBTC
Mempool
Merkle Tree
Mining
Mining Farm
Mining Pool
Mixing
MtGox
Multisig
Nonce
Not your keys,...
Opcode
Orphan block
P2PKH
P2SH
Paper Wallet
Peers
Pieter Wuille
Premining
Private key
Proof of Stake (PoS)
Proof of Work (PoW)
Pruning
Public key
Pump'n'Dump
Replace by Fee (RBF)
Ripemd160
Roger Ver
sat
Satoshi Nakamoto
Schnorr Signatures
Script
Segregated Witness (Segwit)
Sha256
Shitcoin
Sidechain
Signature
Signing
Simplified Payment Verification (SPV)
Smart Contract
Soft Fork
Stratum
Syncing
Testnet
Transaction
Transaction Fees
TransactionId (Txid)
Trezor
User Activated Soft Fork (UASF)
Utxo
Wallet Import Format (WIF)
Watch-Only Address
Whitepaper
List obviously not complete. Suggestions appreciated.
Refs:
https://bitcoin.org/en/developer-glossary https://en.bitcoin.it/wiki/Main_Page https://www.youtube.com/channel/UCgo7FCCPuylVk4luP3JAgVw https://www.youtube.com/useaantonop
submitted by PolaT1x to Bitcoin [link] [comments]

⚡ Lightning Network Megathread ⚡

Last updated 2018-01-29
This post is a collaboration with the Bitcoin community to create a one-stop source for Lightning Network information.
There are still questions in the FAQ that are unanswered, if you know the answer and can provide a source please do so!

⚡What is the Lightning Network? ⚡

Explanations:

Image Explanations:

Specifications / White Papers

Videos

Lightning Network Experts on Reddit

  • starkbot - (Elizabeth Stark - Lightning Labs)
  • roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • stile65 - (Alex Akselrod - Lightning Labs)
  • cfromknecht - (Conner Fromknecht - Lightning Labs)
  • RustyReddit - (Rusty Russell - Blockstream)
  • cdecker - (Christian Decker - Blockstream)
  • Dryja - (Tadge Dryja - Digital Currency Initiative)
  • josephpoon - (Joseph Poon)
  • fdrn - (Fabrice Drouin - ACINQ )
  • pmpadiou - (Pierre-Marie Padiou - ACINQ)

Lightning Network Experts on Twitter

  • @starkness - (Elizabeth Stark - Lightning Labs)
  • @roasbeef - (Olaoluwa Osuntokun - Lightning Labs)
  • @stile65 - (Alex Akselrod - Lightning Labs)
  • @bitconner - (Conner Fromknecht - Lightning Labs)
  • @johanth - (Johan Halseth - Lightning Labs)
  • @bvu - (Bryan Vu - Lightning Labs)
  • @rusty_twit - (Rusty Russell - Blockstream)
  • @snyke - (Christian Decker - Blockstream)
  • @JackMallers - (Jack Mallers - Zap)
  • @tdryja - (Tadge Dryja - Digital Currency Initiative)
  • @jcp - (Joseph Poon)
  • @alexbosworth - (Alex Bosworth - yalls.org)

Medium Posts

Learning Resources

Books

Desktop Interfaces

Web Interfaces

Tutorials and resources

Lightning on Testnet

Lightning Wallets

Place a testnet transaction

Altcoin Trading using Lightning

  • ZigZag - Disclaimer You must trust ZigZag to send to Target Address

Lightning on Mainnet

Warning - Testing should be done on Testnet

Atomic Swaps

Developer Documentation and Resources

Lightning implementations

  • LND - Lightning Network Daemon (Golang)
  • eclair - A Scala implementation of the Lightning Network (Scala)
  • c-lightning - A Lightning Network implementation in C
  • lit - Lightning Network node software (Golang)
  • lightning-onion - Onion Routed Micropayments for the Lightning Network (Golang)
  • lightning-integration - Lightning Integration Testing Framework
  • ptarmigan - C++ BOLT-Compliant Lightning Network Implementation [Incomplete]

Libraries

Lightning Network Visualizers/Explorers

Testnet

Mainnet

Payment Processors

  • BTCPay - Next stable version will include Lightning Network

Community

Slack

IRC

Slack Channel

Discord Channel

Miscellaneous

⚡ Lightning FAQs ⚡

If you can answer please PM me and include source if possible. Feel free to help keep these answers up to date and as brief but correct as possible
Is Lightning Bitcoin?
Yes. You pick a peer and after some setup, create a bitcoin transaction to fund the lightning channel; it’ll then take another transaction to close it and release your funds. You and your peer always hold a bitcoin transaction to get your funds whenever you want: just broadcast to the blockchain like normal. In other words, you and your peer create a shared account, and then use Lightning to securely negotiate who gets how much from that shared account, without waiting for the bitcoin blockchain.
Is the Lightning Network open source?
Yes, Lightning is open source. Anyone can review the code (in the same way as the bitcoin code)
Who owns and controls the Lightning Network?
Similar to the bitcoin network, no one will ever own or control the Lightning Network. The code is open source and free for anyone to download and review. Anyone can run a node and be part of the network.
I’ve heard that Lightning transactions are happening “off-chain”…Does that mean that my bitcoin will be removed from the blockchain?
No, your bitcoin will never leave the blockchain. Instead your bitcoin will be held in a multi-signature address as long as your channel stays open. When the channel is closed; the final transaction will be added to the blockchain. “Off-chain” is not a perfect term, but it is used due to the fact that the transfer of ownership is no longer reflected on the blockchain until the channel is closed.
Do I need a constant connection to run a lightning node?
Not necessarily,
Example: A and B have a channel. 1 BTC each. A sends B 0.5 BTC. B sends back 0.25 BTC. Balance should be A = 0.75, B = 1.25. If A gets disconnected, B can publish the first Tx where the balance was A = 0.5 and B = 1.5. If the node B does in fact attempt to cheat by publishing an old state (such as the A=0.5 and B=1.5 state), this cheat can then be detected on-chain and used to steal the cheaters funds, i.e., A can see the closing transaction, notice it's an old one and grab all funds in the channel (A=2, B=0). The time that A has in order to react to the cheating counterparty is given by the CheckLockTimeVerify (CLTV) in the cheating transaction, which is adjustable. So if A foresees that it'll be able to check in about once every 24 hours it'll require that the CLTV is at least that large, if it's once a week then that's fine too. You definitely do not need to be online and watching the chain 24/7, just make sure to check in once in a while before the CLTV expires. Alternatively you can outsource the watch duties, in order to keep the CLTV timeouts low. This can be achieved both with trusted third parties or untrusted ones (watchtowers). In the case of a unilateral close, e.g., you just go offline and never come back, the other endpoint will have to wait for that timeout to expire to get its funds back. So peers might not accept channels with extremely high CLTV timeouts. -- Source
What Are Lightning’s Advantages?
Tiny payments are possible: since fees are proportional to the payment amount, you can pay a fraction of a cent; accounting is even done in thousandths of a satoshi. Payments are settled instantly: the money is sent in the time it takes to cross the network to your destination and back, typically a fraction of a second.
Does Lightning require Segregated Witness?
Yes, but not in theory. You could make a poorer lightning network without it, which has higher risks when establishing channels (you might have to wait a month if things go wrong!), has limited channel lifetime, longer minimum payment expiry times on each hop, is less efficient and has less robust outsourcing. The entire spec as written today assumes segregated witness, as it solves all these problems.
Can I Send Funds From Lightning to a Normal Bitcoin Address?
No, for now. For the first version of the protocol, if you wanted to send a normal bitcoin transaction using your channel, you have to close it, send the funds, then reopen the channel (3 transactions). In future versions, you and your peer would agree to spend out of your lightning channel funds just like a normal bitcoin payment, allowing you to use your lightning wallet like a normal bitcoin wallet.
Can I Make Money Running a Lightning Node?
Not really. Anyone can set up a node, and so it’s a race to the bottom on fees. In practice, we may see the network use a nominal fee and not change very much, which only provides an incremental incentive to route on a node you’re going to use yourself, and not enough to run one merely for fees. Having clients use criteria other than fees (e.g. randomness, diversity) in route selection will also help this.
What is the release date for Lightning on Mainnet?
Lightning is already being tested on the Mainnet Twitter Link but as for a specific date, Jameson Lopp says it best
Would there be any KYC/AML issues with certain nodes?
Nope, because there is no custody ever involved. It's just like forwarding packets. -- Source
What is the delay time for the recipient of a transaction receiving confirmation?
Furthermore, the Lightning Network scales not with the transaction throughput of the underlying blockchain, but with modern data processing and latency limits - payments can be made nearly as quickly as packets can be sent. -- Source
How does the lightning network prevent centralization?
Bitcoin Stack Exchange Answer
What are Channel Factories and how do they work?
Bitcoin Stack Exchange Answer
How does the Lightning network work in simple terms?
Bitcoin Stack Exchange Answer
How are paths found in Lightning Network?
Bitcoin Stack Exchange Answer
How would the lightning network work between exchanges?
Each exchange will get to decide and need to implement the software into their system, but some ideas have been outlined here: Google Doc - Lightning Exchanges
Note that by virtue of the usual benefits of cost-less, instantaneous transactions, lightning will make arbitrage between exchanges much more efficient and thus lead to consistent pricing across exchange that adopt it. -- Source
How do lightning nodes find other lightning nodes?
Stack Exchange Answer
Does every user need to store the state of the complete Lightning Network?
According to Rusty's calculations we should be able to store 1 million nodes in about 100 MB, so that should work even for mobile phones. Beyond that we have some proposals ready to lighten the load on endpoints, but we'll cross that bridge when we get there. -- Source
Would I need to download the complete state every time I open the App and make a payment?
No you'd remember the information from the last time you started the app and only sync the differences. This is not yet implemented, but it shouldn't be too hard to get a preliminary protocol working if that turns out to be a problem. -- Source
What needs to happen for the Lightning Network to be deployed and what can I do as a user to help?
Lightning is based on participants in the network running lightning node software that enables them to interact with other nodes. This does not require being a full bitcoin node, but you will have to run "lnd", "eclair", or one of the other node softwares listed above.
All lightning wallets have node software integrated into them, because that is necessary to create payment channels and conduct payments on the network, but you can also intentionally run lnd or similar for public benefit - e.g. you can hold open payment channels or channels with higher volume, than you need for your own transactions. You would be compensated in modest fees by those who transact across your node with multi-hop payments. -- Source
Is there anyway for someone who isn't a developer to meaningfully contribute?
Sure, you can help write up educational material. You can learn and read more about the tech at http://dev.lightning.community/resources. You can test the various desktop and mobile apps out there (Lightning Desktop, Zap, Eclair apps). -- Source
Do I need to be a miner to be a Lightning Network node?
No -- Source
Do I need to run a full Bitcoin node to run a lightning node?
lit doesn't depend on having your own full node -- it automatically connects to full nodes on the network. -- Source
LND uses a light client mode, so it doesn't require a full node. The name of the light client it uses is called neutrino
How does the lightning network stop "Cheating" (Someone broadcasting an old transaction)?
Upon opening a channel, the two endpoints first agree on a reserve value, below which the channel balance may not drop. This is to make sure that both endpoints always have some skin in the game as rustyreddit puts it :-)
For a cheat to become worth it, the opponent has to be absolutely sure that you cannot retaliate against him during the timeout. So he has to make sure you never ever get network connectivity during that time. Having someone else also watching for channel closures and notifying you, or releasing a canned retaliation, makes this even harder for the attacker. This is because if he misjudged you being truly offline you can retaliate by grabbing all of its funds. Spotty connections, DDoS, and similar will not provide the attacker the necessary guarantees to make cheating worthwhile. Any form of uncertainty about your online status acts as a deterrent to the other endpoint. -- Source
How many times would someone need to open and close their lightning channels?
You typically want to have more than one channel open at any given time for redundancy's sake. And we imagine open and close will probably be automated for the most part. In fact we already have a feature in LND called autopilot that can automatically open channels for a user.
Frequency will depend whether the funds are needed on-chain or more useful on LN. -- Source
Will the lightning network reduce BTC Liquidity due to "locking-up" funds in channels?
Stack Exchange Answer
Can the Lightning Network work on any other cryptocurrency? How?
Stack Exchange Answer
When setting up a Lightning Network Node are fees set for the entire node, or each channel when opened?
You don't really set up a "node" in the sense that anyone with more than one channel can automatically be a node and route payments. Fees on LN can be set by the node, and can change dynamically on the network. -- Source
Can Lightning routing fees be changed dynamically, without closing channels?
Yes but it has to be implemented in the Lightning software being used. -- Source
How can you make sure that there will be routes with large enough balances to handle transactions?
You won't have to do anything. With autopilot enabled, it'll automatically open and close channels based on the availability of the network. -- Source
How does the Lightning Network stop flooding nodes (DDoS) with micro transactions? Is this even an issue?
Stack Exchange Answer

Unanswered Questions

How do on-chain fees work when opening and closing channels? Who pays the fee?
How does the Lightning Network work for mobile users?
What are the best practices for securing a lightning node?
What is a lightning "hub"?
How does lightning handle cross chain (Atomic) swaps?

Special Thanks and Notes

  • Many links found from awesome-lightning-network github
  • Everyone who submitted a question or concern!
  • I'm continuing to format for an easier Mobile experience!
submitted by codedaway to Bitcoin [link] [comments]

5 ALASAN PENTINGNYA PAKAI DEMO ACCOUNT TRADING BITCOIN CRYPTOCURRENCY (TUTORIAL BITMEX TESTNET) A Thorough Look at Telos (TLOS), a Modified Version of EOS. Telos Testnet Running. Ram Prices Solved Pieter Wuille: New Address Type for SegWit Addresses - YouTube 40,000 New Bitcoin Addresses Created! Uniswap Launches New ... Testing ALFAcoins system with Litecoin Testnet (LTCT ...

Bitcoin address format. Bitcoin address is an identifier (like account number), starting with 1, 3 or bc1 on the mainnet, containing 27-34 alphanumeric Latin characters and digits (except 0, O, I). Also set to Bitcoin Cash mainnet, bchtest for testnet and bchreg for bitcoin cash regtest. A Bitcoin address, or simply address, is an identifier of 27-34 alphanumeric characters, beginning with the ... Testnet Ver1.3 Phoenix allows us to continue working with our great community towards the mass adoption of decentralized ecosystem. We feel proud to tell you that in the upcoming testnet, users will be able to Test TimeLocked payments, Engage with a new smart reward mechanism, Try new address format and Experience SAPI. Testnet.help is dispensing testnet cryptocurrency since 2018. In this website you will be able to ... The account/address usually has a proprietary format; More info (in english) about testnet and scams here; Blockchain explorers. Ethereum Rinkeby Faucet. Bitcoin Testnet Faucet. NEM Faucet Testnet. Cryptocurrency calculator. Introduction. Testnet.help is dispensing testnet cryptocurrency since ... The checksum also allows Bitcoin software to confirm that a 33-character (or shorter) address is in fact valid and is not simply an address with a missing character. Testnet. Addresses on the Bitcoin SV Testnet are generated with a different address version, which results in a different prefix. Misconceptions Address reuse Yes, in bitcoin an address begins with "1" or "3", in testnet bitcoin an address begins with "m" or "2". In the case of Ethereum both addresses can be used, but you can't transfer ether from Rinkeby to the real network. The same for Eos, you can have a testnet account only in testnet and not in mainnet and viceversa.

[index] [51277] [10557] [45758] [12229] [10441] [10866] [35322] [18066] [20181] [51069]

5 ALASAN PENTINGNYA PAKAI DEMO ACCOUNT TRADING BITCOIN CRYPTOCURRENCY (TUTORIAL BITMEX TESTNET)

Litecoin Testnet uses an alternate blockchain that is set aside for testing and e... Skip navigation Sign in. Search. Loading... Close. This video is unavailable. Watch Queue Queue . Watch Queue ... 40,000 new bitcoin addresses created! Uniswap Airdops Token! Blockchain Gaming HEATING UP! What's your take on this guys? Let us know in the comment section ... I've withdraw, it takes 20 days for in wallet If you want to someone to send you money to your Bitcoin account, Give them this address. you may donate to our network via Bitcoin as well :) Bitcoin addres... How to change your "Email Address (Primary Email)" in Facebook ... Creating a Local Bitcoin Testnet / Regtest - Programming Bitcoin - Duration: 23:19. Programming Bitcoin 19,060 views. 23:19. How ...

#